Abstract
Thin copper-nickel foil with multi-nano layers was prepared by pulse-electroforming to develop a high performance electromagnetic shielding material for electronic devices. The pulse electroforming conditions of the aqueous solution chemistry were selected based on the aqueous copper-nickel-sulfur phase diagram and an evaluation of the deposition rate using the finite element..... More

Abstract
The effect of thiourea on the nano-mechanical and chemical properties of Ni-P foil was studied to develop a high performance Ni-P deposit for automobile and machinery parts. The Ni-P deposit was prepared by electroforming in a modified sulphate bath with different amounts of thiourea. Chemical analysis of the electrodeposited Ni-P..... More

Abstract
Numerical modeling of the self-propagating high temperature synthesis (SHS) of Cu_xNi_yZn_1-x-yFe₂O₄ ferrites was carried out using the finite element method, to control the combustion synthesis behaviors of the ferrites. Additional pre-heating above 300 ℃ caused the combustion temperature at the inner surface of the reactant compact to completely propagate the..... More

Abstract
Fe-(20, 45 wt%) Gd intermetallics were vacuum arc melted as the mother alloy of a neutron shielding and absorbing material. The structure of the cast Fe-20 wt% Gd intermetallics had primary dendrites with a short width of about 2 μm, which became coarse with increasing Gd content. The final compositions..... More