| Home | E-Submission/Review | Sitemap | Editorial Office |  
top_img
Korean Journal of Metals and Materials Search > Browse Articles > Search



A Novel Al-Al<sub>2</sub>O<sub>3</sub> Non-Skid Composite Coating with Improved Wear Resistance Fabricated by Twin Wire Arc Spraying
Twin wire arc spray 공정을 통해 제작된 Al-Al2O3복합소재 미끄럼 방지 코팅의 우수한 마모 저항성
Hansol Kwon, Youngjin Park, Yongjin Kang, Dohyun Kim, Uk Hee Nam, Eungsun Byon
권한솔, 박영진, 강용진, 김도현, 남욱희, 변응선
Korean J. Met. Mater. 2024;62(4):257-266.   Published online 2024 Mar 29
DOI: https://doi.org/10.3365/KJMM.2024.62.4.257

Abstract
In this study, novel non-skid Al-Al2O3 coatings with improved wear resistance were fabricated using twin wire arc spray (TWAS). TWAS Al coating was prepared as a reference sample and representative TWAS parameters (working distance, process gas pressure, arc current) were controlled to fabricate different Al-Al2O3 coatings. The Al-Al2O3 coatings showed..... More

                
Research on Thermal Properties and High Temperature Exposure Behavior of Non-Skid Coating Fabricated by Twin Wire Arc Spraying
Twin wire arc spray 용사코팅 공정을 통해 제작된 미끄럼 방지 코팅의 열적 특성 및 고온노출 거동 연구
Hansol Kwon, Youngjin Park, Uk Hee Nam, Eungsun Byon
권한솔, 박영진, 남욱희, 변응선
Korean J. Met. Mater. 2023;61(9):642-651.   Published online 2023 May 14
DOI: https://doi.org/10.3365/KJMM.2023.61.9.642

Abstract
Conventional non-skid coatings for marine construction contain polymeric materials. These materials are generally susceptible to high temperature environments because of their low thermal conductivity and thermal resistance. A metal-based non-skid coating has great potential for high temperature applications, yet, there has only been limited research. In this study, twin wire..... More

                   Web of Science 1  Crossref 1
Utilizing Dip-Coating to Fabricate Gate Dielectric and Semiconductor for Thin-Film Transistors
딥코팅 방법을 활용한 게이트 산화물 유전체 및 반도체 박막의 제조 및 박막트랜지스터 응용
Yongwan Kim, Young-Geun Ha
김용완, 하영근
Korean J. Met. Mater. 2023;61(8):581-588.   Published online 2023 Jul 20
DOI: https://doi.org/10.3365/KJMM.2023.61.8.581

Abstract
The potential applications of advanced electronic materials in large-area, printable, and flexible electronics have generated significant interest. However, creating high-performance, low-voltage thin-film transistors (TFTs) for these applications remains difficult due to a lack of advanced gate dielectric and semiconductor materials that meet both ease-of-fabrication requirements and high electrical performance. In..... More

                
Comparative Analysis of Microstructure and Collision Performance of TWB Hot Stamped Parts with Various Strength Combinations
강도조합에 따른 TWB 핫스탬핑 부품의 미세구조 및 충돌성능 비교 분석
Chang Wook Lee, Yeonjung Hwang, Uk Heo, Byung Gil Yoo, Ji Hong Yoo, Taejeong Kim, Kwang Min Yoon
이창욱, 황연정, 허욱, 유병길, 유지홍, 김태정, 윤광민
Korean J. Met. Mater. 2022;60(11):801-810.   Published online 2022 Oct 31
DOI: https://doi.org/10.3365/KJMM.2022.60.11.801

Abstract
Hot stamping technology has been steadily developed because it provides both excellent formability and high strength. With the development of TWB hot stamping technology, it is now possible to freely apply the required strength and thickness in the right place. In this study, the microstructure and collision performance of TWB..... More

                   Web of Science 1  Crossref 2
Improvement of Photoelectrochemical Properties of CuO Photoelectrode by Li Doping
Li 도핑에 따른 CuO 광전극의 광전기화학적 특성 개선 연구
Seongchan Bae, Sunghyeok Lee, Hyukhyun Ryu, Won-Jae Lee
배성찬, 이성혁, 류혁현, 이원재
Korean J. Met. Mater. 2022;60(8):577-586.   Published online 2022 Jul 12
DOI: https://doi.org/10.3365/KJMM.2022.60.8.577

Abstract
We fabricated a Li doped CuO photoelectrode by doping CuO with Li to improve the photoelectrochemical properties of the CuO photoelectrode. The fabricated Li doped CuO photoelectrode was optimized by experimentally investigating Li doping concentration, annealing temperature, and spin coating deposition cycle. It was confirmed that Li doped CuO had..... More

                   Web of Science 1  Crossref 3
Development of PosMAC<sup></sup> Steel and Its Application Properties
고내식 합금도금 PosMAC® 강판의 개발과 응용 특성
Il-Ryoung Sohn, Tae-Chul Kim, Gwang-Il Ju, Myung-Soo Kim, Jong-Sang Kim
손일령, 김태철, 주광일, 김명수, 김종상
Korean J. Met. Mater. 2021;59(9):613-623.   Published online 2021 Aug 4
DOI: https://doi.org/10.3365/KJMM.2021.59.9.613

Abstract
PosMAC® is a hot dipping Zn-Mg-Al coated steel sheet developed by POSCO. PosMAC®3.0 shows excellent anti-corrosion performance and is suitable for construction and solar energy systems in severe corrosive environments. PosMAC®1.5 has a superior surface quality and is preferred for automotive and home appliances. The advanced anti-corrosion properties of PosMAC®..... More

                   Web of Science 2  Crossref 3
Study on A-Site Compositional Mixing for the Shear Coating Process of FA-Based Lead Halide Perovskites
A-site 조성 제어를 통한 FA기반 페로브스카이트의 상안정화 및 전단 코팅 최적화 연구
Hansol Kim, Hyewon Gu, Minju Song, Choong-Heui Chung, Yong-Jun Oh, Chang Eun Song, Ki-Ha Hong
김한솔, 구혜원, 송민주, 정중희, 오용준, 송창은, 홍기하
Korean J. Met. Mater. 2021;59(5):321-328.   Published online 2021 Apr 6
DOI: https://doi.org/10.3365/KJMM.2021.59.5.321

Abstract
Halide perovskite solar cells have been attracting tremendous attention as next-generation solar cell materials because of their excellent optical and electrical properties. Formamidinium lead tri-iodide (FAPbI3) exhibits the narrowest band gap among lead iodide perovskites and shows excellent thermal and chemical stability, also. However, the large-area coating of FAPbI3 needed..... More

                
Study on a Superhydrophobic Stainless Steel (SUS 304) Surface to Enhance Corrosion Resistance
내식성 향상을 위한 기능성 초발수 스테인리스 스틸 (SUS 304) 표면 연구
Youngju Park, Chanyoung Jeong
박영주, 정찬영
Korean J. Met. Mater. 2021;59(4):217-222.   Published online 2021 Mar 24
DOI: https://doi.org/10.3365/KJMM.2021.59.4.217

Abstract
Stainless steel is a metal with excellent workability, economy, and corrosion resistance, so it is used in various industrial applications including the marine, machinery, electronic parts, piping, power generation, and nuclear power fields. However, in contaminated environments such as marine and gas pipelines, stainless steel has problems, including surface aging..... More

                   Web of Science 4  Crossref 4
Corrosion Behaviors of the Eutectic Structure in Zn-Al-Mg Alloy Coated Steel in Chloride Containing Aqueous Environment
염수환경 내 Zn-Al-Mg 합금도금강재의 공정조직 부식거동
Jae-Won Lee, Se-Young Oh, Bora Park, Min-Suk Oh, Sung Jin Kim
이재원, 오세영, 박보라, 오민석, 김성진
Korean J. Met. Mater. 2020;58(9):610-616.   Published online 2020 Aug 19
DOI: https://doi.org/10.3365/KJMM.2020.58.9.610

Abstract
To clearly understand the effect of the eutectic structure in the Zn-Al-Mg alloy coating on the corrosion behaviors in chloride containing aqueous environments, a bulk Zn-MgZn2 sample was fabricated by diffusion bonding process, and a variety of experiments, such as electrochemical polarization and galvanic corrosion measurements, salt spray tests, and..... More

                   Web of Science 7  Crossref 5
Effects of Al-Si Coating Thickness on 22MnB5 in Hot Stamping Wear
Al-Si 도금층 두께가 22MnB5강의 핫스탬핑 공정 마모에 미치는 영향
Min Ki Ji, Hyunsung Son, Jinkeun Oh, Seongwoo Kim, Kyungmok Kim, Tea-Sung Jun
지민기, 손현성, 오진근, 김성우, 김경목, 전태성
Korean J. Met. Mater. 2020;58(8):573-582.   Published online 2020 Jul 27
DOI: https://doi.org/10.3365/KJMM.2020.58.8.573

Abstract
Al-Si coated ultra-high strength steels (UHSS) are widely used in automotive applications because of their high strength-to-weight ratio, corrosion protection and good weldability. The hot stamping (also called hot press forming) process is an effective and suitable technique for producing automotive parts from Al-Si coated UHSS. However, critical issues, such..... More

                   Web of Science 3  Crossref 3
Improvement of Wear Resistance in Laser Shock-Peened Copper Contacts
Donghyuck Jung, Changkyoo Park, Eun-Joon Chun, Yoon-Jun Kim
Korean J. Met. Mater. 2020;58(8):560-565.   Published online 2020 Jul 27
DOI: https://doi.org/10.3365/KJMM.2020.58.8.560

Abstract
This study investigated the influence of laser shock peening without coating (LSPw/oC) on the degradation of copper electrical contacts. A theoretical calculation of the plastic-affected depth (PAD) induced by LSPw/oC was performed, based on the laser-induced plasma pressure along with the Hugoniot elastic limit of our LSPw/oC experimental conditions. The..... More

                   Web of Science 4  Crossref 3
Microstructures and Oxidation Behaviors of Silicide Coated Nb Alloys by Halide Activated Pack Cementation Process
Halide activated pack cementation에 의한 silicide 코팅층의 형성에 따른 Nb 합금의 산화거동
Wonchul Yang, Choong-Heui Chung, Sangyeob Lee, Kyeong Ho Baek, Youngmoo Kim, Seong Lee, Joon Sik Park
양원철, 정중희, 이상엽, 백경호, 김영무, 이성, 박준식
Korean J. Met. Mater. 2020;58(8):507-514.   Published online 2020 Aug 5
DOI: https://doi.org/10.3365/KJMM.2020.58.8.507

Abstract
In this study, we tried to improve the oxidation resistance of Nb-12Si (wt%) alloys at 1200 °C or higher through pack cementation coatings. Nb-12Si (wt%) alloys were prepared by arc-melting under Ar atmosphere. When the alloys were coated using pack powder mixtures composed of Si, Al2O3 and NaF, two silicide..... More

                
Optical Properties of CaF<sub>2</sub> Anti-Reflection Coating On ZnS for 8~12 m Infrared Region
CaF2 저반사 코팅된 ZnS 윈도우의 8~12 µm 적외선 영역 광학적 특성
Ill-Joo Lee, Seung-Chan Hong, Byung-Sam Kim, Jae-Kyung Cheon
이일주, 홍승찬, 김병삼, 천재경
Korean J. Met. Mater. 2020;58(6):433-438.   Published online 2020 May 19
DOI: https://doi.org/10.3365/KJMM.2020.58.6.433

Abstract
Technologies for pedestrian safety are increasingly emphasized by Automakers in advance of autonomous driving vehicles. A Night Vision System attached behind the front grille can reduce fatal accidents, especially during the nighttime, however, consumers may hesitate to adopt such systems on account of their high price. High-cost Germanium is used..... More

                   Web of Science 1  Crossref 1
Nanostructuring Behavior of NiCrBSi and CoCrWC Thermal Spray Coatings Formed by Temperature-Controlled Laser Heat Treatment
온도 제어형 레이저 열처리에 따른 NiCrBSi 및 CoCrWC 용사 코팅층의 나노구조 형성 거동
Eun-Joon Chun
천은준
Korean J. Met. Mater. 2020;58(4):247-256.   Published online 2020 Mar 10
DOI: https://doi.org/10.3365/KJMM.2020.58.4.247

Abstract
.For surface hardening of a continuous casting mold component, a thermal spray coating of NiCrBSi (Metco-16C) and CoCrWC (Stellite-1) was performed followed by laser heat treatment of the coatings. To support selective modification of the thermal spray coating, a metallurgically determined surface temperature was maintained during the laser heat treatment,..... More

                   Web of Science 4  Crossref 5
Synthesis of MgF<sub>2</sub> Nanoparticles for Improved Anti-Reflective Coating
무반사 코팅을 위한 MgF2 나노입자 합성과 박막 부착력 향상을 위한 연구
Byung-Kwan Song, Jae-Yong Jung, Young-Rae Cho, Jong-Joo Rha, Jeong Wan Kim, Young-Kuk Kim
송병관, 정재용, 조영래, 나종주, 김정완, 김영국
Korean J. Met. Mater. 2020;58(3):201-206.   Published online 2020 Feb 3
DOI: https://doi.org/10.3365/KJMM.2020.58.3.201

Abstract
Anti-reflective (AR) coatings are popular because they offer high durability with effective reflectance and glare reduction, and they can endure both physical and environmental damage. Magnesium fluoride (MgF2) has been used as a nanoparticle coating on AR coating materials by many researchers because they exhibit high transmittance and antireflection characteristics..... More

                   Web of Science 2  Crossref 2
Influence of Alloy Content on Microstructure and Corrosion Resistance of Zn-based Alloy Coated Steel Product
Zn계 합금도금재의 미세구조 및 내식성에 미치는 합금 조성 변화 영향
Jae-Won Lee, Sung-Jin Kim, Min-Suk Oh
이재원, 김성진, 오민석
Korean J. Met. Mater. 2020;58(3):169-174.   Published online 2020 Mar 5
DOI: https://doi.org/10.3365/KJMM.2020.58.3.169

Abstract
The effects of alloy composition on the coating structure and corrosion resistance of hot-dip Znbased alloy coated steel products were investigated. Zn-based alloy coating layers with different Al and Mg compositions were fabricated using a batch-type galvanizing simulator. Various intermetallic compounds including Zn, Zn/MgZn2 binary eutectic, Zn/Al binary eutectoid and..... More

                   Web of Science 6  Crossref 5
Effect of Hot Stamping Heat Treatment Temperature on Resistance Spot Weldability of Al-10% Si Coated 30MnB5 Steel
핫스탬핑 열처리 온도가 Al-10% Si 도금 30MnB5 강의 점용접성에 미치는 영향
Seong Guk Son, Yeonjung Hwang, Chang Wook Lee, Ji Hong Yoo, Minsu Choi
손성국, 황연정, 이창욱, 유지홍, 최민수
Korean J. Met. Mater. 2019;57(12):778-786.   Published online 2019 Oct 8
DOI: https://doi.org/10.3365/KJMM.2019.57.12.778

Abstract
Hot stamping is the most efficient manufacturing process to produce high strength automotive parts with reduced springback. Recently, 30MnB5 steel has been developed for hot stamping steel which can provide above 1700 MPa. However, resistance spot weldability of this steel is insufficient due to the need for a large amount..... More

                   Web of Science 4  Crossref 4
Low-Temperature H<sub>2</sub>S Sensors Based on Si-Coated SnO<sub>2</sub> Nanowires
Myung Sik Choi, Ali Mirzaei, Jae Hoon Bang, Han Gil Na, Changhyun Jin, Wansik Oum, Seungmin Han, Sang Sub Kim, Hyoun Woo Kim
Korean J. Met. Mater. 2019;57(11):732-740.   Published online 2019 Nov 5
DOI: https://doi.org/10.3365/KJMM.2019.57.11.732

Abstract
To attain high life standards, it is important to develop high-performance non-toxic gas sensors for public safety, environmental pollutant control, industrial processes, etc. Because reports on single element semiconductor-coated semiconducting metal oxides for sensing applications are rare, we synthesized SnO2 nanowires and coated them with a 5 nm-thick or 10..... More

                   Crossref 5
Study of the Corrosion Behaviour, Liquid Metal Embrittlement and Resistance Spot Weldability of Galvannealed Hot Stamping Steel
합금화 용융아연도금 핫스탬핑강의 자동차 차체 적용을 위한 부식 거동, 액상금속취화현상 및 점용접성 연구
Yeonjung Hwang, Chang Wook Lee, Ga-Young Shin, Ji Hong Yoo, Minsu Choi
황연정, 이창욱, 신가영, 유지홍, 최민수
Korean J. Met. Mater. 2019;57(3):193-201.   Published online 2019 Feb 8
DOI: https://doi.org/10.3365/KJMM.2019.57.3.193

Abstract
The hot stamping process is beneficial for fabricating high strength automotive parts without spring back. To suppress high temperature oxidation and decarburization, it is necessary to coat the hot stamping steel. In the present work, the performance of galvannealed coated (GA) hot stamped steel was evaluated. During cyclic corrosion tests,..... More

                   Web of Science 6  Crossref 7
Oxidation Behaviors of Alloys Containing /B2 Phases of Ti-45Al-Mo-Nb Alloys and Evaluation of the Oxidation Behaviors of Si Pack Cementation Coated Alloys
β/B2상을 포함한 Ti-Al-Mo-Nb 합금의 산화 거동과 실리콘 화합물 코팅을 통한 내산화성 개선
Kwangsu Choi, Youngbuem Song, Seonghoon Yi, Joon Sik Park
최광수, 송영범, 이승훈, 박준식
Korean J. Met. Mater. 2019;57(3):131-137.   Published online 2019 Feb 8
DOI: https://doi.org/10.3365/KJMM.2019.57.3.131

Abstract
Alloys containing the β/B2 phases of Ti-45Al-3Mo, Ti-45Al-3Mo-2Nb and Ti-45Al-5Mo were prepared using an vacuum arc-melting machine. Heat-treatments were carried out at 1250 oC in an Ar atmosphere. The temperature of 1250 oC is the temperature region of phase α + γ + (β/B2), and the heat treatment condition which..... More

                   Web of Science 2  Crossref 2
Corrosion Resistance and Adhesion of Paint Coating Film on Zn-Mg-Al Hot-Dip Galvanized Steel Sheets
아연-마그네슘-알루미늄 합금도금강판의 도장 내식성 및 밀착성
Jae-Won Lee, Bora Park, Sung Jin Kim
이재원, 박보라, 김성진
Korean J. Met. Mater. 2019;57(2):77-83.   Published online 2019 Jan 9
DOI: https://doi.org/10.3365/KJMM.2019.57.2.77

Abstract
Zn-Al-Mg alloy galvanized steel sheets have excellent corrosion resistance and improved cut-edge corrosion resistance. Most of the galvanized steel sheets used for outdoor applications are coated again on the galvanizing layer, or after a plastic film is laminated. As the corrosion products formed by the corrosion of Zn accumulate over..... More

                   Web of Science 10  Crossref 7
Rosette Strain Sensors Based on Stretchable Metal Nanowire Piezoresistive Electrodes
신축성 금속 나노선 압저항 전극 기반 로젯 스트레인 센서
Kang-Hyun Kim, Jae-Gyeong Cha, Jong-Man Kim
김강현, 차재경, 김종만
Korean J. Met. Mater. 2018;56(11):835-843.   Published online 2018 Nov 5
DOI: https://doi.org/10.3365/KJMM.2018.56.11.835

Abstract
In this work, we report a delta rosette strain sensor based on highly stretchable silver nanowire (AgNW) percolation piezoresistors. The proposed rosette strain sensors were easily prepared by a facile twostep fabrication route. First, three identical AgNW piezoresistive electrodes were patterned in a simple and precise manner on a donor..... More

                   Crossref 1
Microstructure of Rhenium Coatings Deposited by CVD on Graphite and Mo Substrates
흑연 및 Mo 기판 위에 CVD 성장된 Re 코팅층의 미세조직
Sun Kyu Lee, Dong Yun Nam, Nam Ho Bae, Sung Taek Lim, Yong-Jun Oh
이선규, 남동윤, 배남호, 임성택, 오용준
Korean J. Met. Mater. 2018;56(3):197-204.   Published online 2018 Mar 6
DOI: https://doi.org/10.3365/KJMM.2018.56.3.197

Abstract
Rhenium coatings were fabricated on a graphite substrate at 1100 and 1250 oC and a molybdenum substrate at 1150 and 1250 oC by chemical vapor deposition (CVD) using ReCl5 precursor, and the effects of deposition temperatures and substrates on microstructure and crystal orientation were investigated. The rhenium coating on graphite..... More

    
Effects of Feedstock Powder Characteristics on the Microstructural Features and Erosion Resistance of WC-12Co Coatings
분말소재 특성에 따른 고속화염용사 WC-12Co 코팅층의 미세조직 및 침식 저항성
So-Yeong Kang, Kyeong-Ho Baik, Sang-Hoon Yoon, Hyung-Jun Kim
강소영, 백경호, 윤상훈, 김형준
Korean J. Met. Mater. 2018;56(2):113-120.   Published online 2018 Feb 5
DOI: https://doi.org/10.3365/KJMM.2018.56.2.113

Abstract
WC-Co coatings manufactured by high velocity oxy-fuel (HVOF) spraying have a superior hardness and wear resistance. In this study, HVOF-sprayed WC-12Co coatings from three different feedstock powders were evaluated in terms of microstructural features, carbide decomposition and erosion resistance. The fused-crushed and the sintered-crushed WC-12Co powders had an angular shape,..... More

       Crossref 1
Study on the Part Unit Corrosion Evaluation for Automotive Lower Arm Using Electrochemical Cyclic Corrosion Test
전기화학적 순환부식 시험법을 활용한 자동차 로어암의 단품단위 부식평가에 관한 연구
Seon-Hong Kim, Ji-Hoon Lee, Jung-Gu Kim, Min Jang
김선홍, 이지훈, 김정구, 장민
Korean J. Met. Mater. 2018;56(2):103-112.   Published online 2018 Feb 5
DOI: https://doi.org/10.3365/KJMM.2018.56.2.103

Abstract
This research focused on the development of the part unit evaluation for an organic coated automotive lower arm using the electrochemical cyclic corrosion test (E-CCT). The E-CCT accelerates both the coating degradation and the perforation corrosion. The applied potential for the coating degradation was determined to be -500 mVSCE for..... More

    
Characteristics of NiOYSZ Gas Sensor Employing YSZ Solid Electrolyte Prepared by Thermal Spray Coating Method
용사코팅 YSZ 고체 전해질이 응용된 NiO・YSZ 가스센서의 특성
Il-Hwan Bang, Sung-Yong Cho
방일환, 조성용
Korean J. Met. Mater. 2017;55(11):819-824.   Published online 2017 Oct 31
DOI: https://doi.org/10.3365/KJMM.2017.55.11.819

Abstract
A mixed potential-type NiO・YSZ (yttria stabilized zirconia) gas sensor employing 8YSZ solid electrolyte film was fabricated using a thermal spray coating method, and tested in a NO2 atmosphere at various operating temperatures. The thermal spray coating method is useful for mass producing solid electrolytes without a forming, sintering or bonding..... More

    
Pulsed Electrodeposition of Thin Cobalt Coating Layer on Ferritic Stainless Steel for SOFC Interconnects
Suk-Chul Kwak, Byung Kyu Kim, Dong-Ik Kim, Young Whan Cho
Korean J. Met. Mater. 2017;55(11):768-776.   Published online 2017 Oct 31
DOI: https://doi.org/10.3365/KJMM.2017.55.11.768

Abstract
A thin, compact, and uniform cobalt layer was coated on ferritic stainless steel (Crofer 22 APU) by high frequency square pulsed electrodeposition in an aqueous solution containing cobalt chloride and boric acid. The effects of various electrodeposition parameters and post heat treatment on the morphology, thickness, roughness and adhesion of..... More

    
Near Infrared Reflecting Properties of TiO<sub>2</sub>/Ag/TiO<sub>2</sub> Multilayers Prepared by DC/RF Magnetron Sputtering
Sung Han Kim, Seo Han Kim, Pung Keun Song
Korean J. Met. Mater. 2017;55(8):581-586.   Published online 2017 Aug 1
DOI: https://doi.org/10.3365/KJMM.2017.55.8.581

Abstract
The near-infrared (NIR) reflecting properties of TiO2 /Ag /TiO2 (TAT) multilayers deposited using DC/RF magnetron sputtering were investigated. For high transmittance and reflectance in the visible and NIR ranges, respectively, the thickness of each layer was theoretically optimized by the index matching method. As the Ag layer thickness increased, the..... More

    
Effects of Dispersion Solvent on the Spray Coating Deposition of Silver Nanowires
스프레이 코팅법으로 증착된 은나노선의 특성에 미치는 분산용매의 영향
Ji-Hye Choe, A-Yeon Jang, Jeong-Heui Kim, Choong-Heui Chung, Ki-Ha Hong
최지혜, 장아연, 김정희, 정중희, 홍기하
Korean J. Met. Mater. 2017;55(7):509-514.   Published online 2017 Jul 4
DOI: https://doi.org/10.3365/KJMM.2017.55.7.509

Abstract
Silver nanowire (AgNWs) networks offer a promising approach for producing cost effective transparent electrode materials. However, high temperature annealing is necessary to achieve low sheet resistance, which limits the use of AgNWs for low temperature processing applications such as flexible electronics, and perovskites solar cell fabrication. This study shows that..... More

       Crossref 2
Synthesis of Cu-coated Graphite Powders Using a Chemical Reaction Process
화학반응법을 이용한 Cu-coated 복합분체 합성
Jun-Ho Jang, Hyun-Kuk Park, Jae-Won Lim, Ik-Hyun Oh
장준호, 박현국, 임재원, 오익현
Korean J. Met. Mater. 2017;55(5):315-319.   Published online 2017 May 9
DOI: https://doi.org/10.3365/KJMM.2017.55.5.315

Abstract
In this paper, Cu-coated graphite powders for a low thermal expansion coefficient and a high thermal conductivity are fabricated using a chemical reaction process. The Cu particles adhere to the irregular graphite powders and they homogeneously disperse in the graphite matrix. Cu-coated graphite powders are coarser at approximately 3~4 ㎛..... More

    
1 | 2 |
E-Submission
Email Alert
Author's Index
Specialties
Journal Impact Factor 1.2
The Korean Institute of Metals and Materials
SCImago Journal & Country Rank
Scopus
GoogleScholar
Similarity Check
Crossref Cited-by Linking
KOFST
COPE
Editorial Office
The Korean Institute of Metals and Materials
6th Fl., Seocho-daero 56-gil 38, Seocho-gu, Seoul 06633, Korea
TEL: +82-2-557-1071   FAX: +82-2-557-1080   E-mail: metal@kim.or.kr
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Institute of Metals and Materials.                 Developed in M2PI