| Home | E-Submission/Review | Sitemap | Editorial Office |  
top_img
Korean Journal of Metals and Materials Search > Browse Articles > Search



Enhancement of Dielectric Properties via Crystal Structure and Microstructure Control in the (K<sub>0.5</sub>Na<sub>0.5</sub>)NbO<sub>3</sub>-SrTiO<sub>3</sub> System
(K0.5Na0.5)NbO3-SrTiO3계에서 결정구조 및 미세구조 제어를 통한 유전특성 향상
Seong Eun Lee, Jun-Hyeong Kwon, Kyoung-Seok Moon
이성은, 권준형, 문경석
Korean J. Met. Mater. 2021;59(7):499-504.   Published online 2021 Jun 16
DOI: https://doi.org/10.3365/KJMM.2021.59.7.499

Abstract
Solid solutions and composites of a mixture of (K0.5Na0.5)NbO3 (KNN) and SrTiO3 (ST) were respectively synthesized by different process routes using a conventional solid state reaction. All starting materials were mixed simultaneously and calcined at 800 oC for 4 h to obtain the solid solutions of KNN-ST. Meanwhile, the composites..... More

                   Web of Science 1  Crossref 1
Microstructure and Mechanical Properties of Continuous Welded 50N Rail
Wookjin Choi, Min Ji Song, Nam-Hyoung Lim, Soo Yeol Lee
Korean J. Met. Mater. 2019;57(12):755-763.   Published online 2019 Dec 5
DOI: https://doi.org/10.3365/KJMM.2019.57.12.755

Abstract
Rails are subjected to repeated stresses due to wheel-rail contact during train service. Rails under stress conditions undergo microstructural changes, and these cause degradations of the structural integrity and lifetime of rails. In this study, three different rails (newly-manufactured rail, newly-manufactured head-hardened rail, and worn (used) rail) were compared to..... More

                
Capture and Solidification of Rare Earth Nuclide (Nd) in LiCl-KCl Eutectic Salt Using a Synthetic Inorganic Composite
무기합성매질을 이용한 LiCl-KCl 공융염 내 희토류 핵종(Nd)의 포집 및 고화
Na-Young Kim, Hee-Chul Eun, Hwan-Seo Park, Do-Hee Ahn
김나영, 은희철, 박환서, 안도희
Korean J. Met. Mater. 2017;55(6):419-426.   Published online 2017 Jun 1
DOI: https://doi.org/10.3365/KJMM.2017.55.6.419

Abstract
In this study, neodymium (Nd) nuclides in LiCl-KCl eutectic salts were captured and solidified using a synthetic inorganic composite (Li2O-SiO2-Al2O3-B2O3), a process that allows the selective capture of Nd and fabrication of a composite with Nd captured from waste, without additional additives or mixing. The Nd nuclides in the LiCl-KCl..... More

    
Optical Devices & Energy Materials
A Study on the Trapping Characteristics of Rhenium Oxide Using Ca(OH)<sub>2</sub>
Ca(OH)2를 이용한 레늄 산화물의 포집반응 특성 연구
Tae-Kyo Lee, Hee-Chul Eun, Jung-Hoon Choi, Ki-Rak Lee, Seung-Youb Han, Hwan-Seo Park
이태교, 은희철, 최정훈, 이기락, 한승엽, 박환서
Korean J. Met. Mater. 2017;55(1):53-59.   Published online 2017 Jan 5
DOI: https://doi.org/10.3365/KJMM.2017.55.1.53

Abstract
The objective of this study was to obtain basic data for trapping gaseous technetium (Tc) oxide generated from the voloxidation process in spent nuclear fuel pyroprocessing. Rhenium (Re) and Ca(OH)2 were used as surrogates for the technetium and a trapping material, respectively. The trapping characteristics of rhenium oxide were investigated..... More

       Crossref 1
Microstructure and Mechanical Properties of Continuous Welded 50N Rail
Wookjin Choi1, Min Ji Song1, Nam-Hyoung Lim2, and Soo Yeol Lee1,*

Abstract
Rails are subjected to repeated stresses due to wheel-rail contact during train service. Rails under stress conditions undergo microstructural changes, and these cause degradations of the structural integrity and lifetime of rails. In this study, three different rails (newly-manufactured rail, newly-manufactured headhardened rail, and worn (used) rail) were compared to... More
Microstructure and Mechanical Properties of Continuous Welded 50N Rail
Wookjin Choi1, Min Ji Song1, Nam-Hyoung Lim2, and Soo Yeol Lee1,*

Published online 1999 Nov 30
Abstract
Rails are subjected to repeated stresses due to wheel-rail contact during train service. Rails under stress conditions undergo microstructural changes, and these cause degradations of the structural integrity and lifetime of rails. In this study, three different rails (newly-manufactured rail, newly-manufactured headhardened rail, and worn (used) rail) were compared to... More
Microstructure and Mechanical Properties of Continuous Welded 50N Rail
Wookjin Choi1, Min Ji Song1, Nam-Hyoung Lim2, and Soo Yeol Lee1,*

Published online 1999 Nov 30
Abstract
Rails are subjected to repeated stresses due to wheel-rail contact during train service. Rails under stress conditions undergo microstructural changes, and these cause degradations of the structural integrity and lifetime of rails. In this study, three different rails (newly-manufactured rail, newly-manufactured headhardened rail, and worn (used) rail) were compared to examine the effects... More
Microstructure and Mechanical Properties of Continuous Welded 50N Rail
Wookjin Choi, Min Ji Song, Nam-Hyoung Lim, Soo Yeol Lee
Published online 1999 Nov 30
Abstract
Rails are subjected to repeated stresses due to wheel-rail contact during train service. Rails under stress conditions undergo microstructural changes, and these cause degradations of the structural integrity and lifetime of rails. In this study, three different rails (newly-manufactured rail, newly-manufactured head-hardened rail, and worn (used) rail) were compared to... More
Microstructure and Mechanical Properties of Continuous Welded 50N Rail

Published online 1999 Nov 30
Abstract
Rails are subjected to repeated stresses due to wheel-rail contact during train service. Rails under stress conditions undergo microstructural changes, and these cause degradations of the structural integrity and lifetime of rails. In this study, three different rails (newly-manufactured rail, newly-manufactured head-hardened rail, and worn (used) rail) were compared to... More
1 |
E-Submission
Email Alert
Author's Index
Specialties
Journal Impact Factor 1.2
The Korean Institute of Metals and Materials
SCImago Journal & Country Rank
Scopus
GoogleScholar
Similarity Check
Crossref Cited-by Linking
KOFST
COPE
Editorial Office
The Korean Institute of Metals and Materials
6th Fl., Seocho-daero 56-gil 38, Seocho-gu, Seoul 06633, Korea
TEL: +82-2-557-1071   FAX: +82-2-557-1080   E-mail: metal@kim.or.kr
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Institute of Metals and Materials.                 Developed in M2PI