| Home | E-Submission/Review | Sitemap | Editorial Office |  
Korean Journal of Metals and Materials Search > Browse Articles > Search

Hot Workability and Dynamic Recrystallization Behaviors of Medium-Carbon Cr-Mo Alloys for High Strength Cold Heading Quality Wire Rod
고강도 냉간압조용 중탄소 Cr-Mo 합금강의 고온변형특성 및 동적재결정 거동 평가
YongDeok Jo, HuiJu Lee, SungSil Nam, HyeonWoo Kang, ByoungLok Jang
조용덕, 이희주, 남성실, 강현우, 장병록
Korean J. Met. Mater. 2022;60(6):423-431.   Published online 2022 May 24
DOI: https://doi.org/10.3365/KJMM.2022.60.6.423

The hot deformation behavior of medium-carbon Cr-Mo alloy, which has been developed for high strength cold-heading quality wire rod, was investigated to evaluate its hot workability. A flow curve was derived using the hot torsion test, under conditions with temperatures of 1173-1273 K and strain rates of 0.1-1.0 s-1. At..... More

Effect of Joule-Heating Treatment on the Microstructure and Physical Properties of 16-Stranded Compressed Copper Wires
Jin-Ju Choi, Byoungyong Im, Yubin Kang, Dae-Geun Kim
최진주, 임병용, 강유빈, 김대근
Korean J. Met. Mater. 2021;59(11):796-801.   Published online 2021 Oct 28
DOI: https://doi.org/10.3365/KJMM.2021.59.11.796

Compressed wires are produced by cross-sectionally compressing stranded conductors, which results in a smaller conductor diameter. This also leads to a lower weight wire, because a thinner external insulated coating can be used, compared to the low-voltage wires typically used in automobiles. However, a post production heat treatment of the..... More

Effect of Phase Decomposition on Recrystallization in -Zr Region in Zr-2.5%Nb Pressure Tube Material
Zr-2.5%Nb 압력관 재료에서 α-Zr 영역에서의 소둔에 의한 β-상 분해가 재결정에 미치는 영향
SungSoo Kim, Sang Yup Lim, Gyeong-Geun Lee
김성수, 임상엽, 이경근
Korean J. Met. Mater. 2020;58(10):672-679.   Published online 2020 Oct 5
DOI: https://doi.org/10.3365/KJMM.2020.58.10.672

The effects of β phase decomposition on recrystallization and texture variation in Zr-2.5% Nb alloy pressure tube material were investigated. Isothermal annealing was conducted at 350 to 550 oC for 240 hours, and isothermal annealing was performed at 500 oC for 240 to 3,000 hours. The recrystallization and texture variation..... More

                           Cited By 1
Effect of Rolling Temperature on the Microstructural Characteristics of High-Speed-Rolled Mg Alloy with Initial Non-Basal Texture
비기저면 집합조직을 가지는 마그네슘 합금의 고속압연 온도 변화에 따른 압연재 미세조직 변화
Su Jin Lee, Ye Jin Kim, Jeong Hun Lee, Sung Hyuk Park
이수진, 김예진, 이정훈, 박성혁
Korean J. Met. Mater. 2019;57(8):482-490.   Published online 2019 Jul 4
DOI: https://doi.org/10.3365/KJMM.2019.57.8.482

In this study, the effects of rolling temperature on the microstructural characteristics of a highspeed-rolled Mg alloy with a non-basal texture were investigated. To this end, commercial AZ31 alloy samples in which the basal poles of most grains were tilted at an angle of 45° from the normal direction (ND)..... More

Precise Flow Stress Analysis for the Occurrence of Dynamic Ferritic Transformation and Dynamic Recrystallization of Austenite in Low Carbon Steel
고온 변형 곡선을 이용한 동적 재결정 해석과 동적 상변태의 조기 예측
Nokeun Park
Korean J. Met. Mater. 2018;56(11):779-786.   Published online 2018 Nov 5
DOI: https://doi.org/10.3365/KJMM.2018.56.11.779

There have been previous attempts to observe the occurrence of dynamic ferritic transformation at temperatures even above Ae3 in a low-carbon steel, and not only in steels, but recently also in titanium alloys. In this study, a new approach is proposed that involves treating true stress-true strain curves in uniaxial..... More

                           Cited By 1
Comparative Study on the Texture Evolution and Formability of Warm-Rolled and Cold-Rolled AZ31 Magnesium Alloy Sheets
온간 압연 및 냉간 압연으로 제조한 AZ31 마그네슘 합금 판재의 집합조직 및 성형성 비교
Su Mi Jo, Bong Sun You, Young Min Kim
조수미, 유봉선, 김영민
Korean J. Met. Mater. 2018;56(10):734-744.   Published online 2018 Oct 5
DOI: https://doi.org/10.3365/KJMM.2018.56.10.734

The microstructure, texture evolution, and room temperature formability of warm-rolled and coldrolled AZ31 magnesium sheets were investigated in this study. The localized deformation regions, i.e., shear bands, formed during warm-rolling and cold-rolling mainly provide nucleation sites for recrystallization, but the orientation of the recrystallized grains nucleated on the shear bands..... More

                           Cited By 5
Influence of Heat Treatment on Mechanical Properties for Cold Worked 304 Austenitic Stainless Steel
냉간압연 된 304 오스테나이트 스테인리스강의 열처리에 의한 기계적 특성 평가
Minha Park, Kwangyoon Kim, Jaeho Jang, Hyoung Chan Kim, Hyoung-Seok Moon, Jong Bae Jeon, Dae-Geun Nam, Keun Yong Sohn, Byung Jun Kim
박민하, 김광윤, 장재호, 김형찬, 문형석, 전종배, 남대근, 손근용, 김병준
Korean J. Met. Mater. 2018;56(7):490-498.   Published online 2018 Jul 5
DOI: https://doi.org/10.3365/KJMM.2018.56.7.490

Austenitic stainless steels are widely used in a variety of industries, such as power plants, aerospace, automotive, construction and electronics, due to their excellent mechanical properties including ductility, toughness and corrosion resistance. For application in various industries, many parts and products require plastic processes such as cold rolling, cold forging..... More

                           Cited By 2
A Study of Silicon Crystallization Dependence upon Silicon Thickness in Aluminum-induced Crystallization Process
Doo Won Lee, Muhammad Fahad Bhopal, Soo Hong Lee
Korean J. Met. Mater. 2018;56(5):400-405.   Published online 2018 May 8
DOI: https://doi.org/10.3365/KJMM.2018.56.5.400

Aluminum-induced crystallization(AIC) is one of the ways to improve characteristics of thin-film poly-crystalline (TFPC) silicon solar cell since it shows large grain size and good properties for TFPC silicon solar cell. In AIC process, aluminum is firstly deposited on foreign substrate. Then, silicon is deposited on aluminum. Annealing was done..... More

         Cited By 1
Effect of Al Addition on the Microstructure, Tensile Properties, and Bendability of Extruded Mg-7Sn-1Zn Alloy
Al 첨가가 Mg-7Sn-1Zn 합금 압출재의 미세조직과 인장 및 굽힘 특성에 미치는 영향
Sang-Hoon Kim, Jong Un Lee, Ye Jin Kim, Jae Ok Choi, Jeong-Hun Lee, Sung Hyuk Park
김상훈, 이종언, 김예진, 최재옥, 이정훈, 박성혁
Korean J. Met. Mater. 2018;56(1):40-48.   Published online 2018 Jan 1
DOI: https://doi.org/10.3365/KJMM.2018.56.1.40

The effect of Al addition on the microstructure and mechanical properties of extruded Mg-Sn based alloy is investigated by adding 1 wt% Al to the Mg-7Sn-1Zn alloy and indirectly extruding the billets with and without the Al addition. The Al addition promotes dynamic recrystallization (DRX) behaviour during hot extrusion, which..... More

         Cited By 7
Evaluation of Mechanical Property for Welded Austenitic Stainless Steel 304 by Following Post Weld Heat Treatment
STS304의 후열처리에 따른 용접부 미세조직과 기계적 특성 평가
Daehan Jang, Kwangyoon Kim, Hyoung Chan Kim, Jong Bae Jeon, Dae-Geun Nam, Keun Yong Sohn, Byung Jun Kim
장대한, 김광윤, 김형찬, 전종배, 남대근, 손근용, 김병준
Korean J. Met. Mater. 2017;55(9):664-670.   Published online 2017 Aug 30
DOI: https://doi.org/10.3365/KJMM.2017.55.9.664

Austenitic stainless steels have excellent mechanical property and corrosion resistance, and are for these reasons used in demanding applications such as power plant, nuclear reactor and off-shore plant. Especially, austenitic stainless steel 304 (STS304) is mainly used as a pipe material in nuclear power plants. Submerged arc welding (SAW) is..... More

         Cited By 5
Hot Deformation Behavior of As-cast Low Nickel Fe-22Cr-9.5Mn-3.3Ni Austenite Steel
니켈감량 Fe-22Cr-9.5Mn-3.3Ni 오스테나이트강 주조재의 고온 변형성
Sang Yeon Ahn, Jae Sook Song, Sun Ig Hong
안상연, 송재숙, 홍순익
Korean J. Met. Mater. 2017;55(7):477-485.   Published online 2017 Jul 4
DOI: https://doi.org/10.3365/KJMM.2017.55.7.477

The hot deformation behavior of as-cast and homogenized Fe-22Cr-9.5Mn-3.3Ni stainless steel was investigated over a temperature range between 600~1,250 ℃. The deformability of the as-cast Fe-22Cr-9.5Mn-3.3Ni steel decreased with increasing temperature up to 850 ℃, and then increased at temperatures between 900 and 1200 ℃ caused by dynamic recrystallization at..... More

Microstructure and High Temperature Plastic Deformation Behavior of Al-12Si Based Alloy Fabricated by an Electromagnetic Casting and Stirring Process
전자기주조법으로 제조된 Al-12Si계 합금의 미세조직 및 고온 소성변형 거동
Kyung-Soo Jeon, Heung-Ryeol Roh, Mok-Soon Kim, Jong-Ho Kim, Joon-Pyo Park
전경수, 노흥렬, 김목순, 김종호, 박준표
Korean J. Met. Mater. 2017;55(6):386-395.   Published online 2017 Jun 1
DOI: https://doi.org/10.3365/KJMM.2017.55.6.386

An as-received EMC/S (electromagnetic casting and stirring)-processed Al-12Si based alloy billet was homogenized to examine its microstructure and high temperature plastic deformation behavior, using compressive tests over the temperature range from 623 to 743 K and a strain rate range from 1.0×10-3 to 1.0×100s-1. The results were compared with samples..... More

Soft Magnetic Properties of Fe-based Amorphous/Nanocrystalline Hybrid Materials
철계 비정질/나노 결정 하이브리드 소재의 연자성 특성
Yeonjoo Lee, Jonggyu Jeon, Teasuk Jang, Minwoo Lee, Yongjin Kim, Dongyeol Yang, Mijung Lee, Hyunjoo Choi
이연주, 전종규, 장태석, 이민우, 김용진, 양동열, 이미정, 최현주
Korean J. Met. Mater. 2017;55(5):328-334.   Published online 2017 May 9
DOI: https://doi.org/10.3365/KJMM.2017.55.5.328

In this study, the effect of the crystalline structure on the magnetic properties of Fe-based amorphous powder is investigated. The Fe-B-P-C-Nb-Hf amorphous powder with excellent soft magnetic properties is prepared via gas-atomization, and the atomized amorphous powder is annealed in order to generate a small amount of nanosized crystallites in..... More

         Cited By 2
Correlation Between Electrical Conductivity and Catalytic Property in 78V<sub>2</sub>O<sub>5</sub>-15P<sub>2</sub>O<sub>5</sub>-7B<sub>2</sub>O<sub>3</sub> Glass Containing Fe<sub>2</sub>O<sub>3</sub>
Fe2O3를 포함한 78V2O5-15P2O5-7B2O3계 유리의 결정화에 따른 전기전도도와 촉매특성의 상관관계
Hwa-Jin Jeong, Jong-hwan Kim, Bong-Ki Ryu
정화진, 김종환, 류봉기
Korean J. Met. Mater. 2016;54(12):931-936.   Published online 2016 Dec 5
DOI: https://doi.org/10.3365/KJMM.2016.54.12.931

In this study, we established a correlation between the electrical conductivity and catalytic properties of vanadium borophosphate glass containing Fe2O3. Glasses were synthesized in the 78V2O5–15P2O5–7B2O3 ternary-system containing x mol% Fe2O3 (x = 1, 5, 7.5, and 10). Electrical conductivity was measured at 45 ℃ for samples heat-treated at 340..... More

High Temperature Deformation and Continuous Dynamic Recrystallization Behaviors of AA6082 using Processing Maps
공정지도를 이용한 AA6082 합금의 연속 동적 재결정 및 고온 변형 거동
Sang-Min Lee, Ji-Woon Lee, Hyun-Jin Choi, Soong-Keun Hyun
이상민, 이지운, 최현진, 현승균
Korean J. Met. Mater. 2016;54(11):793-801.   Published online 2016 Nov 5
DOI: https://doi.org/10.3365/KJMM.2016.54.11.793

Torsion tests were performed on AA6082 samples to investigate their flow softening behavior and to determine optimum process conditions. Based on the experimental data and dynamic materials model, high strain processing maps were established which demonstrate the constitutive relationships among temperature, strain rate, strain and stress. The flow curves exhibited..... More

         Cited By 6
1 |
Email Alert
Author's Index
Impact factor
The Korean Institute of Metals and Materials
SCImago Journal & Country Rank
Similarity Check
Crossref Cited-by Linking
Editorial Office
The Korean Institute of Metals and Materials
6th Fl., Seocho-daero 56-gil 38, Seocho-gu, Seoul 06633, Korea
TEL: +82-2-557-1071   FAX: +82-2-557-1080   E-mail: metal@kim.or.kr
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Institute of Metals and Materials.                 Developed in M2PI