| Home | E-Submission/Review | Sitemap | Editorial Office |  
top_img
Korean Journal of Metals and Materials Search > Browse Articles > Search



Effect of Process Parameter and Scanning Strategy on the Microstructure and Mechanical Properties of Inconel 625 Superalloy Manufactured by Laser Direct Energy Deposition
레이저 직접 적층 공정으로 제조된 Inconel 625 초합금의 미세구조 및 기계적 특성에 공정 변수 및 스캔 전략이 미치는 영향
Hyunji Nam, Qing-Ye Jin, Jiyoung Park, Wookjin Lee
남현지, Qing-Ye Jin, 박지영, 이욱진
Korean J. Met. Mater. 2023;61(10):772-784.   Published online 2023 Sep 25
DOI: https://doi.org/10.3365/KJMM.2023.61.10.772

Abstract
This study aimed to investigate the effect of process parameters on the microstructure and mechanical properties of Inconel 625 alloy manufactured by direct energy deposition process. The Inconel 625 samples were produced by varying the laser scanning speeds from 720 - 960 mm/min while maintaining the same the laser energy..... More

      
An Optimization of Manufacturing Process of SS304L Using Direct Energy Deposition Method
DED 공정에서의 SS304L 적층 조건 최적화
Sung Eun Kim, Sung Chan Yoo, Hyun-Gil Kim
김성은, 유승찬, 김현길
Korean J. Met. Mater. 2022;60(11):819-826.   Published online 2022 Oct 31
DOI: https://doi.org/10.3365/KJMM.2022.60.11.819

Abstract
The direct energy deposition (DED) method is an emerging manufacturing technique that has been recently highlighted due to its capabilities to coat materials with complex geometry for high temperature and highly corrosive environmental applications, such as steam turbine blade. Amongst metallic materials, SS304L has been reported to have superior corrosion..... More

                           Cited By 2
Effect of Post-Weld Heat Treatment on Microstructure and Hardness Evolution of Functionally Graded Materials Produced by Direct Energy Deposition
고에너지 직접 적층법으로 제조된 경사조성재료의 미세조직 및 경도 변화에 미치는 후열처리 영향 연구
Giseung Shin, Yongho Park, Dae Whan Kim, Ji hyun Yoon, Jeoung Han Kim
신기승, 박용호, 김대환, 윤지현, 김정한
Korean J. Met. Mater. ;59(2):81-98.   Published online 2021 Jan 27
DOI: https://doi.org/10.3365/KJMM.2021.59.2.81

Abstract
In this work, the effects of post weld heat treatment (PWHT) on the microstructure and mechanical properties of functionally gradient materials (FGM) was investigated. The FGM consisted of five different layers which were mixtures of austenitic stainless steel (type 316L) and ferritic steel (LAS). The ratio of type 316L and..... More

                           Cited By 4
A Study on the Influence of Laser Power on the Microstructure and Mechanical Properties of Functionally Graded Materials Produced by Direct Energy Deposition
고에너지 직접 적층법으로 제조된 경사조성재료의 미세조직 및 기계적 특성에 미치는 레이저 출력의 영향 연구
Giseung Shin, Ji hyun Yoon, Dae Whan Kim, Yongho Park, Jeoung Han Kim
신기승, 윤지현, 김대환, 박용호, 김정한
Korean J. Met. Mater. 2020;58(11):782-792.   Published online 2020 Oct 15
DOI: https://doi.org/10.3365/KJMM.2020.58.11.782

Abstract
This study investigated the effects of laser power on the microstructure and mechanical properties of functionally gradient materials (FGM) produced by direct energy deposition. The FGM consisted of five different layers, which were a mixture of austenitic stainless steel (Type 316L) and ferritic steel (HSLA). During the direct energy deposition,..... More

                           Cited By 3
Effects of Heat Treatment Condition and Counter Materials on the Wear Behavior of Laser Direct Energy Deposited Fe-8Cr-3V-2Mo-2W Alloy
레이저 직접적층법으로 제조된 Fe-8Cr-3V-2Mo-2W합금의 마모특성에 미치는 열처리공정 및 상대재의 영향
Kyeongsik Ha, Young Keun Park, Taehwan Kim, Gyeong Yun Baek, Jong Bae Jeon, Do-sik Shim, Young Hoon Moon, Wookjin Lee
하경식, 박영근, 김태환, 백경윤, 전종배, 심도식, 문영훈, 이욱진
Korean J. Met. Mater. 2020;58(10):680-692.   Published online 2020 Oct 5
DOI: https://doi.org/10.3365/KJMM.2020.58.10.680

Abstract
This study aimed to investigate the wear performance of laser direct energy deposited Fe-8Cr3V-2Mo-2W alloy under various wear environments, in terms of different heat treatment conditions. Ball on disk tribology tests were performed using high-carbon steel and zirconia balls as counter materials. The wear rates of the alloy depended significantly..... More

                           Cited By 6
Effect of In-Situ Post Heating on Repairing STS316L Built by Laser Powder Bed Fusion Using Direct Energy Deposition
레이저로 적층 제조된 STS316L에 대한 직접에너지적층 응용 보수 시 공정 중 후열처리(In-Situ Post Heating) 효과
Wook Jin Oh, Yong Son, Do Sik Shim
오욱진, 손용, 심도식
Korean J. Met. Mater. 2019;57(8):543-553.   Published online 2019 Jul 11
DOI: https://doi.org/10.3365/KJMM.2019.57.8.543

Abstract
The repairing parts were fabricated by PBF (powder bed fusion) using direct energy deposition (DED), interfacial cracks can occur at the interface between the substrate and the area to be repaired. Such interfacial defects are due to the thermal stress induced by the temperature gradient which results from repeated melting..... More

                           Cited By 5
1 |
E-Submission
Email Alert
Author's Index
Specialties
Journal Impact Factor 1.2
The Korean Institute of Metals and Materials
SCImago Journal & Country Rank
Scopus
GoogleScholar
Similarity Check
Crossref Cited-by Linking
KOFST
COPE
Editorial Office
The Korean Institute of Metals and Materials
6th Fl., Seocho-daero 56-gil 38, Seocho-gu, Seoul 06633, Korea
TEL: +82-2-557-1071   FAX: +82-2-557-1080   E-mail: metal@kim.or.kr
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Institute of Metals and Materials.                 Developed in M2PI