| Home | E-Submission/Review | Sitemap | Editorial Office |  
Korean Journal of Metals and Materials Search > Browse Articles > Search

Hot Workability and Dynamic Recrystallization Behaviors of Medium-Carbon Cr-Mo Alloys for High Strength Cold Heading Quality Wire Rod
고강도 냉간압조용 중탄소 Cr-Mo 합금강의 고온변형특성 및 동적재결정 거동 평가
YongDeok Jo, HuiJu Lee, SungSil Nam, HyeonWoo Kang, ByoungLok Jang
조용덕, 이희주, 남성실, 강현우, 장병록
Korean J. Met. Mater. 2022;60(6):423-431.   Published online 2022 May 24
DOI: https://doi.org/10.3365/KJMM.2022.60.6.423

The hot deformation behavior of medium-carbon Cr-Mo alloy, which has been developed for high strength cold-heading quality wire rod, was investigated to evaluate its hot workability. A flow curve was derived using the hot torsion test, under conditions with temperatures of 1173-1273 K and strain rates of 0.1-1.0 s-1. At..... More

Effect of Rolling Temperature on the Microstructural Characteristics of High-Speed-Rolled Mg Alloy with Initial Non-Basal Texture
비기저면 집합조직을 가지는 마그네슘 합금의 고속압연 온도 변화에 따른 압연재 미세조직 변화
Su Jin Lee, Ye Jin Kim, Jeong Hun Lee, Sung Hyuk Park
이수진, 김예진, 이정훈, 박성혁
Korean J. Met. Mater. 2019;57(8):482-490.   Published online 2019 Jul 4
DOI: https://doi.org/10.3365/KJMM.2019.57.8.482

In this study, the effects of rolling temperature on the microstructural characteristics of a highspeed-rolled Mg alloy with a non-basal texture were investigated. To this end, commercial AZ31 alloy samples in which the basal poles of most grains were tilted at an angle of 45° from the normal direction (ND)..... More

Precise Flow Stress Analysis for the Occurrence of Dynamic Ferritic Transformation and Dynamic Recrystallization of Austenite in Low Carbon Steel
고온 변형 곡선을 이용한 동적 재결정 해석과 동적 상변태의 조기 예측
Nokeun Park
Korean J. Met. Mater. 2018;56(11):779-786.   Published online 2018 Nov 5
DOI: https://doi.org/10.3365/KJMM.2018.56.11.779

There have been previous attempts to observe the occurrence of dynamic ferritic transformation at temperatures even above Ae3 in a low-carbon steel, and not only in steels, but recently also in titanium alloys. In this study, a new approach is proposed that involves treating true stress-true strain curves in uniaxial..... More

                           Cited By 1
Hot Deformation Behavior of As-cast Low Nickel Fe-22Cr-9.5Mn-3.3Ni Austenite Steel
니켈감량 Fe-22Cr-9.5Mn-3.3Ni 오스테나이트강 주조재의 고온 변형성
Sang Yeon Ahn, Jae Sook Song, Sun Ig Hong
안상연, 송재숙, 홍순익
Korean J. Met. Mater. 2017;55(7):477-485.   Published online 2017 Jul 4
DOI: https://doi.org/10.3365/KJMM.2017.55.7.477

The hot deformation behavior of as-cast and homogenized Fe-22Cr-9.5Mn-3.3Ni stainless steel was investigated over a temperature range between 600~1,250 ℃. The deformability of the as-cast Fe-22Cr-9.5Mn-3.3Ni steel decreased with increasing temperature up to 850 ℃, and then increased at temperatures between 900 and 1200 ℃ caused by dynamic recrystallization at..... More

1 |
Email Alert
Author's Index
Impact factor
The Korean Institute of Metals and Materials
SCImago Journal & Country Rank
Similarity Check
Crossref Cited-by Linking
Editorial Office
The Korean Institute of Metals and Materials
6th Fl., Seocho-daero 56-gil 38, Seocho-gu, Seoul 06633, Korea
TEL: +82-2-557-1071   FAX: +82-2-557-1080   E-mail: metal@kim.or.kr
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Institute of Metals and Materials.                 Developed in M2PI