| Home | E-Submission/Review | Sitemap | Editorial Office |  
top_img
Korean Journal of Metals and Materials Search > Browse Articles > Search



Effect of Ethylene Glycol on the Dissolution of Palladium with HCl Solution Containing Oxidizing Agents and Selective Precipitation of Pd(IV) Compound
Viet Nhan Hoa Nguyen, Si Jeong Song, Man Seung Lee
Korean J. Met. Mater. 2022;60(7):502-510.   Published online 2022 Jun 3
DOI: https://doi.org/10.3365/KJMM.2022.60.7.502

Abstract
There is growing interest in the recovery of pure palladium (Pd) compound from cemented Pd from spent electroplating solutions due to increasing demand for Pd, and there is considerable motivation to develop an efficient recovery process. In conventional methods of leaching Pd metal, HCl solutions containing oxidizing agents are employed...... More

                        
Recovery of High-Purity Lithium Compounds from the Dust of the Smelting Reduction Process for Spent Lithium-Ion Batteries
Thanh Tuan Tran, Seong Ho Son, Man Seung Lee
손성호, 이만승
Korean J. Met. Mater. 2022;60(4):291-300.   Published online 2022 Mar 28
DOI: https://doi.org/10.3365/KJMM.2022.60.4.291

Abstract
The recovery of valuable metals such as cobalt, nickel, and lithium from spent lithium-ion batteries (LIBs) has attracted much attention. In this study, a hydrometallurgical process for the recovery of high-purity lithium compounds like Li2CO3 and Li3PO4 from dust containing Li, Co, Ni, Cu, Fe, Mn, and Si produced during..... More

                        
Effect of Dissolution of Precipitates on Mechanical Properties of A7075-T6 Alloy
A7075-T6 합금에서 η' 석출상의 재고용이 기계적 특성에 미치는 영향
Young-We Kim, Yong-Hee Jo, Yun-Soo Lee, Hyoung-Wook Kim, Je-In Lee
김영위, 조용희, 이윤수, 김형욱, 이제인
Korean J. Met. Mater. 2022;60(1):83-93.   Published online 2021 Dec 14
DOI: https://doi.org/10.3365/KJMM.2022.60.1.83

Abstract
The effects of dissolution of the η′ phase by solution treatment on the mechanical properties of A7075-T6 alloy were investigated. Immediately after solution treatment of the T6 sheet at 450 oC or higher, elongation significantly increased and dissolution of the η′ phase occurred. η′ is the main hardening phase. After..... More

                        Supplementary         Cited By 2
Influences of Heat Treatment on the Thermal Diffusivity and Corrosion Characterization of Al-Mg-Si alloy
Al-Mg-Si 합금에서 열처리가 열확산도와 부식특성에 미치는 영향
Yu-Mi Kim, Se-Weon Choi, Young-Chan Kim, Chang-Seog Kang
김유미, 최세원, 김영찬, 강창석
Korean J. Met. Mater. 2021;59(8):582-588.   Published online 2021 Jul 5
DOI: https://doi.org/10.3365/KJMM.2021.59.8.582

Abstract
The effect of the heat treatment on the Mg2Si phase in Al-Mg-Si alloy was investigated by a laser flash apparatus (LFA), Differential scanning calorimetry (DSC) and corrosion test. The alloy samples were solution treated at 590 oC for a half hour followed by warm water quenching, and then aged in..... More

                        
Probability-Dependent Precipitation Strengthening Effect of Anisotropic Precipitate in Al-Mg-Si Alloy Produced by T6 Heat Treatment
T6 열처리에 의한 Al-Mg-Si 합금의 비등방성 석출물 형상을 고려한 확률 의존적 석출강화효과
Seunggyu Choi, Gwanghun Kim, Jin Pyeong Kim, Se Hoon Kim, Seung Bae Son, Seok-Jae Lee
최승규, 김광훈, 김진평, 김세훈, 손승배, 이석재
Korean J. Met. Mater. 2021;59(8):515-523.   Published online 2021 Jul 5
DOI: https://doi.org/10.3365/KJMM.2021.59.8.515

Abstract
This study proposed a constitutive equation to predict the change in yield strength according to the behavior of β″ metastable precipitates, which have a profound effect on strength among materials precipitated during the T6 heat treatment of Al-Mg-Si alloy. The β″ precipitate is a metastable phase before it becomes a..... More

                           Cited By 2
Effect of Electrolyte Anion on Electrochemical Behavior of Nickel Hexacyanoferrate Electrode in Aqueous Sodium-Ion Batteries
수용액 기반 소듐 이온 배터리용 헥사사이아노철산 니켈의 전기화학 거동에 미치는 전해질내 음이온의 영향
Sungjun Park, Sang-Eun Chun
박성준, 전상은
Korean J. Met. Mater. 2020;58(12):896-906.   Published online 2020 Dec 4
DOI: https://doi.org/10.3365/KJMM.2020.58.12.896

Abstract
Nickel hexacyanoferrate (NiHCF) has a three-dimensional open framework structure, excellent long-cycling stability and rate performance as a cathode for aqueous sodium-ion batteries. However, the specific capacity of NiHCF is lower than that of present cathodes for aqueous batteries. A sodium-ion electrolyte was explored to achieve optimum capacity with NiHCF. Powder-type..... More

                           Cited By 2
Effect of Pre-Aging Treatment on the Mechanical Properties of Cold Rolled Cu-6 wt% Ni-1.4 wt% Si Alloy
Cu-6 wt% Ni-1.4 wt% Si 합금의 압연 후 기계적 성질에 미치는 시효전 처리 영향
Sang Jin Lee, Hyeon Seok Shin, Eun-Ae Choi, Jee Hyuk Ahn, Yoonsuk Choi, Sangshik Kim, Jehyun Lee, Seung Zeon Han
이상진, 신현석, 최은애, 안지혁, 최윤석, 김상식, 이재현, 한승전
Korean J. Met. Mater. 2020;58(7):488-494.   Published online 2020 Jul 5
DOI: https://doi.org/10.3365/KJMM.2020.58.7.488

Abstract
Cu-Ni-Si alloys were strengthened by Ni2Si intermetallic compound precipitation in a Cu matrix during aging. The Cu-6 wt% Ni-1.4wt%Si alloy was prepared by water quenching (solution treatment) or air cooling (homogenization treatment) after heating 980 oC for 2 hours and aging at 500 oC for 6 hours. After maintaining a..... More

                           Cited By 3
A Method of Synthesizing Lithium Hydroxide Nanoparticles Using Lithium Sulfate from Spent Batteries by 2-Step Precipitation Method
Soyeong Joo, Hyun-Woo Shim, Jin-Ju Choi, Chan-Gi Lee, Dae-Guen Kim
Korean J. Met. Mater. 2020;58(4):286-291.   Published online 2020 Mar 10
DOI: https://doi.org/10.3365/KJMM.2020.58.4.286

Abstract
In this work, LiOH was synthesized using highly soluble Li2SO4. To enhance efficiency, this synthesis was performed using the precipitation method, and the correlation between each experimental condition and the synthesis of LiOH was investigated. The particle size and crystalline properties were tailored by controlling various experimental conditions, including the..... More

                           Cited By 2
Synthesis and Characterization of the Cu<sub>0.72</sub>Co<sub>2.28</sub>O<sub>4</sub> Catalyst for Oxygen Evolution Reaction in an Anion Exchange Membrane Water Electrolyzer
음이온 교환막 수전해에 사용되는 Cu0.72Co2.28O4 산소 발생 촉매의 합성 및 특성 분석
Sung Min Park, Myeong Je Jang, Yoo Sei Park, Jooyoung Lee, Jae-yeop Jeong, Jaehoon Jung, Min-Kwan Choi, Yu-Seong Noh, Min-Ho Seo, Hyung Ju Kim, Juchan Yang, Yang Do Kim, Sung Mook Choi
박성민, 장명제, 박유세, 이주영, 정재엽, 정재훈, 최민관, 노유성, 서민호, 김형주, 양주찬, 김양도, 최승목
Korean J. Met. Mater. 2020;58(1):49-58.   Published online 2019 Dec 12
DOI: https://doi.org/10.3365/KJMM.2020.58.1.49

Abstract
In this study, we investigated the morphological, crystal structural, electronic structural, and electrocatalytic properties of the inverse spinel structured copper cobalt oxide (Cu0.72Co2.28O4) catalysts. The materials were prepared by coprecipitation using various copper and cobalt precursors, and subsequent oxidation treatment. Electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and Brunauer Emmett..... More

                           Cited By 8
Recovery of Cadmium in Nickel-Cadmium Leaching Solution by Sulfide Precipitation Method
폐니켈-카드뮴 침출용액으로부터 황화물 침전법을 이용한 카드뮴 회수에 대한 연구
Il-Jeong Park, Dae-Weon Kim, Min-Jun Kim, Hang-Chul Jeong
박일정, 김대원, 김민준, 정항철
Korean J. Met. Mater. 2019;57(11):726-731.   Published online 2019 Nov 5
DOI: https://doi.org/10.3365/KJMM.2019.57.11.726

Abstract
A large amount of waste nickel-cadmium batteries are being produced, and various studies have been conducted to recover the valuable metals contained in the batteries. Solvent extraction is mainly used to recover nickel and cadmium, but that method has economic and environmental problems. In this study, to solve these problems,..... More

                           Cited By 1
Evaluation of Dynamic Precipitation in Extruded Mg-Zn Alloy
Mg-Zn합금의 압출 공정 중 동적 석출 거동에 대한 고찰
Guang Zhe Li, Min Young Na, Hye Jung Chang, Pil Ryung Cha, Yu Chan Kim, Hyun Kwang Seok
이광철, 나민영, 장혜정, 차필령, 김유찬, 석현광
Korean J. Met. Mater. 2019;57(9):555-561.   Published online 2019 Aug 21
DOI: https://doi.org/10.3365/KJMM.2019.57.9.555

Abstract
The dynamic precipitation evolution of Mg-3 wt% Zn alloy during extrusion was evaluated in this study. Precipitation evolution during aging has been well investigated for the Mg-Zn alloy, which is known as static precipitation. However, little attention has been given to dynamic precipitation in Mg-Zn alloy. In order to evaluate..... More

                        
Effect of Pre-Aging Treatment on Bake-Hardenability of Al-8.0Zn-2.5Mg-2.0Cu Alloy Sheet Fabricated by Twin-Roll Casting Process
박판주조공정으로 제조한 Al-8.0Zn-2.5Mg-2.0Cu 합금 판재의 소부경화특성에 미치는 예비시효의 영향
Ji-Goo Heo, Yun-Soo Lee, Min-Seok Kim, Hyoung-Wook Kim, Yang-Do Kim
허지구, 이윤수, 김민석, 김형욱, 김양도
Korean J. Met. Mater. 2019;57(6):396-404.   Published online 2019 May 16
DOI: https://doi.org/10.3365/KJMM.2019.57.6.396

Abstract
The effects of natural and pre-aging on the microstructure and mechanical properties of Al-8.0Zn-2.5Mg-2.0Cu aluminum alloy sheet fabricated by twin roll casting were investigated. Immediately after solution treatment, the Al-8.0Zn-2.5Mg-2.0Cu alloy sheet had a yield strength of 173 MPa and elongation of 19.5%. The hardness of the Al-8.0Zn-2.5Mg-2.0Cu alloy sheet..... More

                           Cited By 7
Effect of Prior Cold Working before Aging on the Precipitation Behavior in a Cu-3.5 wt% Ti Alloy
Cu-3.5 wt% Ti 합금의 석출 거동에 미치는 시효 전 가공의 영향
Minah Jo, Eun-Ae Choi, Jee Hyuk Ahn, Young Guk Son, Kwangho Kim, Jehyun Lee, Satoshi Semboshi, Seung Zeon Han
조민아, 최은애, 안지혁, 손영국, 김광호, 이재현, 사토시 셈보시, 한승전
Korean J. Met. Mater. 2019;57(1):10-17.   Published online 2018 Dec 14
DOI: https://doi.org/10.3365/KJMM.2019.57.1.10

Abstract
Cu-Ti alloys were strengthened by Cu4Ti intermetallic compound precipitation in a Cu matrix during aging. The Cu-3.5 wt% Ti(Cu-4.6 at% Ti) alloys without deformation and with uniform and non-uniform deformation were aged at 450 oC for various times after solution treatment at 885 oC. The uniformly and non-uniformly deformed alloys..... More

                           Cited By 7
Effect of Al Addition on the Microstructure, Tensile Properties, and Bendability of Extruded Mg-7Sn-1Zn Alloy
Al 첨가가 Mg-7Sn-1Zn 합금 압출재의 미세조직과 인장 및 굽힘 특성에 미치는 영향
Sang-Hoon Kim, Jong Un Lee, Ye Jin Kim, Jae Ok Choi, Jeong-Hun Lee, Sung Hyuk Park
김상훈, 이종언, 김예진, 최재옥, 이정훈, 박성혁
Korean J. Met. Mater. 2018;56(1):40-48.   Published online 2018 Jan 1
DOI: https://doi.org/10.3365/KJMM.2018.56.1.40

Abstract
The effect of Al addition on the microstructure and mechanical properties of extruded Mg-Sn based alloy is investigated by adding 1 wt% Al to the Mg-7Sn-1Zn alloy and indirectly extruding the billets with and without the Al addition. The Al addition promotes dynamic recrystallization (DRX) behaviour during hot extrusion, which..... More

         Cited By 7
Bake-hardening Properties of Al-0.6Mg-1.2Si Alloy Sheets Fabricated by Twin Roll Casting
박판주조법으로 제조한 Al-0.6Mg-1.2Si 합금판재의 소부경화특성
Gi-Cheol Ju, Yun-Soo Lee, Min-Seok Kim, Hyoung-Wook Kim, Yang-Do Kim
주기철, 이윤수, 김민석, 김형욱, 김양도
Korean J. Met. Mater. 2017;55(12):853-861.   Published online 2017 Dec 4
DOI: https://doi.org/10.3365/KJMM.2017.55.12.853

Abstract
The effect of pre-aging treatment on the microstructure and mechanical properties of Al-0.6Mg-1.2Si aluminum alloy sheets fabricated by twin roll casting (TRC) was investigated. It was observed that two kinds of nanoclusters, cluster(1) and cluster(2), play an important role in the bake-hardening properties of Al-Mg-Si aluminum alloy. The hardness of..... More

      
Mechanical Properties of Discontinuous Precipitated Al-Zn Alloys after Drawing at Room and Cryogenic Temperatures
불연속 석출된 Al-Zn 합금의 상온 및 극저온 인발에 따른 미세조직 변화가 기계적 특성에 미치는 영향
Min Soo Kim, Seung Zeon Han, Jehyun Lee, Sung Hwan Lim, Jee Hyuk Ahn, Sang-Shik Kim, Kwang Ho Kim
김민수, 한승전, 이재현, 임성환, 안지혁, 김상식, 김광호
Korean J. Met. Mater. 2017;55(2):77-84.   Published online 2017 Feb 2
DOI: https://doi.org/10.3365/KJMM.2017.55.2.77

Abstract
In order to study the effect of microstructural change on the tensile properties of discontinuous precipitated Al-Zn binary alloy, four different Al-Zn alloys(25, 30, 35, 45 wt% Zn) were aged at 160 ℃ for different aging times(0, 5, 15, 30, 60, 120, 360 min) after being solution treated at 400..... More

         Cited By 3
Effect of Second Aging Treatment on the Microstructure and Mechanical Properties of SUH660 Alloy
SUH660합금의 미세조직 및 기계적 특성에 미치는 2차 시효 열처리의 영향
Do-Hoon Kim, You-Hwan Lee, Jeoung Han Kim
김도훈, 이유환, 김정한
Korean J. Met. Mater. 2016;54(10):716-722.   Published online 2016 Oct 5
DOI: https://doi.org/10.3365/KJMM.2016.54.10.716

Abstract
nSUH660 is a precipitation hardening stainless steel which has high strength at moderately high temperature. In this study, the effect of a secondary aging-treatment after the standard 720 °C heat-treatment was investigated. The Rockwell C hardness test with detailed TEM observerations was performed to study the steel’s hardening mechanism. The..... More

         Cited By 3
1 |
E-Submission
Email Alert
Author's Index
Specialties
Impact factor
The Korean Institute of Metals and Materials
SCImago Journal & Country Rank
Scopus
GoogleScholar
Similarity Check
Crossref Cited-by Linking
KOFST
COPE
Editorial Office
The Korean Institute of Metals and Materials
6th Fl., Seocho-daero 56-gil 38, Seocho-gu, Seoul 06633, Korea
TEL: +82-2-557-1071   FAX: +82-2-557-1080   E-mail: metal@kim.or.kr
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Institute of Metals and Materials.                 Developed in M2PI