| Home | E-Submission/Review | Sitemap | Editorial Office |  
Korean Journal of Metals and Materials Search > Browse Articles > Search

Improvement in the Hydrogenation and Dehydrogenation Features of Mg by Milling in Hydrogen with Vanadium Chloride
수소 분위기에서 Mg와 VCl3의 밀링에 의한 Mg의 수소 흡수 방출 특성의 향상
Myoung Youp Song, Seong Ho Lee, Young Jun Kwak
송명엽, 이성호, 곽영준
Korean J. Met. Mater. 2021;59(10):709-717.   Published online 2021 Sep 6
DOI: https://doi.org/10.3365/KJMM.2021.59.10.709

VCl3 (vanadium (III) chloride) was selected as an additive to Mg to increase the hydrogenation and dehydrogenation rates and the hydrogen storage capacity of Mg. Instead of MgH2, Mg was used as a starting material since Mg is cheaper than MgH2. Samples with a composition of 95 wt% Mg +..... More

                           Cited By 2
Improvement of the Hydrogen-Release Features of Mg-Graphene Composite by Adding Nickel via Reactive Ball Milling
Eunho Choi, Young Jun Kwak, Myoung Youp Song
Korean J. Met. Mater. 2019;57(10):663-672.   Published online 2019 Sep 6
DOI: https://doi.org/10.3365/KJMM.2019.57.10.663

The dehydrogenation rates of graphene-added Mg (named Mg-5graphene) were very low at 573 K and 593 K. Ni was added to increase the dehydrogenation rates of graphene-added Mg. Samples (designated as Mg-2.5Ni-2.5graphene) with a composition of 95 wt% Mg + 2.5 wt% Ni + 2.5 wt% graphene were prepared by..... More

                           Cited By 4
Hydrogen Storage Properties of Mg Alloy Prepared by Incorporating Polyvinylidene Fluoride via Reactive Milling
Myoung Youp Song, Young Jun Kwak
Korean J. Met. Mater. 2018;56(12):878-884.   Published online 2018 Dec 5
DOI: https://doi.org/10.3365/KJMM.2018.56.12.878

In the present work, we selected a polymer, polyvinylidene fluoride (PVDF), as an additive to improve the hydrogenation and dehydrogenation properties of Mg. 95 wt% Mg + 5 wt% PVDF (designated Mg-5PVDF) samples were prepared via milling in hydrogen atmosphere (reactive milling), and the hydrogenation and dehydrogenation characteristics of the..... More

                           Cited By 5
Raising the Dehydrogenation Rate of a Mg-CMC (Carboxymethylcellulose, Sodium Salt) Composite by Alloying Ni via Hydride-Forming Milling
Myoung Youp Song, Eunho Choi, Young Jun Kwak
Korean J. Met. Mater. 2018;56(8):620-627.   Published online 2018 Aug 5
DOI: https://doi.org/10.3365/KJMM.2018.56.8.620

In our previous work, samples with a composition of 95 wt% Mg + 5 wt% CMC (Carboxymethylcellulose, Sodium Salt, [C6H7O2(OH)x(C2H2O3Na)y]n) (named Mg-5 wt%CMC) were prepared through hydride-forming milling. Mg-5 wt%CMC had a very high hydrogenation rate but a low dehydrogenation rate. Addition of Ni to Mg is known to increase..... More

                           Cited By 5
Hydrogen Uptake and Release Characteristics of Mg-xTaF<sub>5</sub>-xVCl<sub>3</sub> (x=1.25, 2.5, and 5)
Myoung Youp Song, Young Jun Kwak
Korean J. Met. Mater. 2018;56(8):611-619.   Published online 2018 Aug 5
DOI: https://doi.org/10.3365/KJMM.2018.56.8.611

TaF5 and VCl3 were chosen as additives to enhance the hydrogen uptake and release rates of Mg. The total content of the additives was not more than 10 wt% since too high content reduces the fraction of Mg and thus the hydrogen storage capacity of the alloys. Samples with compositions..... More

                           Cited By 6
Microstructure Evaluation and Low Cycle Fatigue Damage due to Degradation of Ni-based Superalloy
니켈기 초내열합금의 열화에 따른 미세구조 및 저주기 피로손상도 평가
Inkang Heo, Donghyun Yoon, Sanghyun Hong, Jinyeol Kim, Jaehoon Kim, Sungho Chang, Siyeon Bae
허인강, 윤동현, 홍상현, 김진열, 김재훈, 장성호, 배시연
Korean J. Met. Mater. 2018;56(8):561-569.   Published online 2018 Aug 5
DOI: https://doi.org/10.3365/KJMM.2018.56.8.561

Nickel-based superalloys have excellent resistance to extreme environments such as high temperature and high stress and are used as materials for large gas turbines. In this paper, specimens were taken from a blade that had been used for a long time, and their life span was studied by analysis of microstructure...... More

                           Cited By 2
Development of a Mg-Based Alloy with a Hydrogen-Storage Capacity of 7 wt% by Adding a Polymer CMC via Transformation-Involving Milling
Myoung Youp Song, Eunho Choi, Young Jun Kwak
Korean J. Met. Mater. 2018;56(5):392-399.   Published online 2018 May 8
DOI: https://doi.org/10.3365/KJMM.2018.56.5.392

The addition of CMC (Carboxymethylcellulose, Sodium Salt) may improve the hydriding and dehydriding properties of Mg since it has a relatively low melting point and the melting of CMC during transformation-involving milling may put the milled samples in good states to absorb and release hydrogen rapidly. Samples with compositions of..... More

         Cited By 6
Effect of Mn, Si, and Sb on High-temperature Oxidation of Fe-Mn-Al-Si-Sb-C Steels
Fe-Mn-Al-Si-Sb-C 강의 고온산화에 미치는 Mn, Si, Sb 첨가효과
Soon Yong Park, Dong Bok Lee
박순용, 이동복
Korean J. Met. Mater. 2017;55(5):308-314.   Published online 2017 May 9
DOI: https://doi.org/10.3365/KJMM.2017.55.5.308

High Mn twinning-induced plasticity (TWIP) steels with compositions of Fe-(18.0-18.17) Mn-1.51Al-(0.48-0.52)Si-(0.61-0.62)C-(0.52-0.54)Cr-(0.22-0.23)Ni-0.03Nb-(0-0.04)Sb (wt%) are oxidized at 650 ℃ and 750 ℃ for < 24 h in air in order to determine the effect of the alloying elements on the oxidation. They are oxidized parabolically to MnO2,Mn2O3,FeO,Fe2O3, and FeMn2O4 oxides with relatively..... More

         Cited By 1
Effect of Added Gas-Atomized Al-Si/SiC<sub>p</sub> Composite Powder on the Sinterability and Mechanical Properties of Alumix 431 fabricated by Hot-Pressing Process
Eunsun Lee, Jeong-Jung Oak, Yongjin Kim, Yongho Park
Korean J. Met. Mater. 2017;55(2):98-109.   Published online 2017 Feb 2
DOI: https://doi.org/10.3365/KJMM.2017.55.2.98

The aim of this study is to establish an optimized hot-press sintering condition for aluminum matrix composites (AMCs) by analyzing their sintered microstructure and mechanical properties. The fabricated AMCs in this study consisted of a blend of commercial Ecka Alumix 431 powder, and Al-Si/SiCp powder manufactured by gas atomizer (Al-Si/SiCp)...... More

         Cited By 1
Effect of Basicity on the Reduction Behavior of Carbon Composite Iron Oxide Briquette
탄재내장 산화철 브리켓의 환원거동에 미치는 염기도 영향
Jae-Hong Kwon, Eui-Hyuk Kwon, Ki-Woo Lee, Kang-Min Kim, Ji-A Lee, Jeong-Whan Han
권재홍, 권의혁, 이기우, 김강민, 이지아, 한정환
Korean J. Met. Mater. 2016;54(11):846-854.   Published online 2016 Nov 5
DOI: https://doi.org/10.3365/KJMM.2016.54.11.846

The world is gradually running short of high quality iron resources. This forces ironmaking processes to focus on the use of low quality iron ores. Carbon composite iron oxide briquettes (CCB) are one of the alternative choices. CCB enables the utilization of low quality powdered iron ores and coal, and..... More

         Cited By 1
Casting/Solidification/Heat Treatment
Study on the Surface Microstructure of a Modified STD61 Steel Mold Used for the Die Casting Process
다이캐스팅 공정에 사용된 개량형 STD61 열간 금형 표면의 미세조직에 관한 연구
Ha-Young Yu, Seung-Joon Lee, Minwoo Kang, Suk-Jin Lee, Won Jon Yang, Jae Suk Jeong, Byung-Hoon Kim, Young-Kook Lee
유하영, 이승준, 강민우, 이석진, 양원존, 정재석, 김병훈, 이영국
Korean J. Met. Mater. 2016;54(9):672-680.   Published online 2016 Sep 5
DOI: https://doi.org/10.3365/KJMM.2016.54.9.672
The surface microstructure and crack formation of an aluminum die-casting mold were investigated. The mold was made of a modified STD61 steel, and was used for more than 165,000 cycles. The mold surface consisted of four layers; an oxidized layer, a decarburized layer, a network carbide layer and a tempered... More
Corrosion & Surface Treatment
High Temperature Oxidation Behavior of Mg-5% Ca-1% Zn Alloys
Kwon Yong Ji, Dong Bok Lee
Korean J. Met. Mater. 2016;54(9):645-651.   Published online 2016 Sep 5
DOI: https://doi.org/10.3365/KJMM.2016.54.9.645

Pure Mg, Mg-5wt%Ca, and Mg-5wt%Ca-1wt%Zn alloys were cast, and their high-temperature oxidation behavior was investigated to determine the roles of Ca and Zn in oxidation. Ca and Zn additions refined the microstructure by formation of Mg2Ca and Ca2Mg6Zn3, respectively, at grain boundaries. Ca increased the oxidation resistance by forming a..... More

         Cited By 2
1 |
Email Alert
Author's Index
Impact factor
The Korean Institute of Metals and Materials
SCImago Journal & Country Rank
Similarity Check
Crossref Cited-by Linking
Editorial Office
The Korean Institute of Metals and Materials
6th Fl., Seocho-daero 56-gil 38, Seocho-gu, Seoul 06633, Korea
TEL: +82-2-557-1071   FAX: +82-2-557-1080   E-mail: metal@kim.or.kr
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Institute of Metals and Materials.                 Developed in M2PI