| Home | E-Submission/Review | Sitemap | Editorial Office |  
Korean Journal of Metals and Materials Search > Browse Articles > Search

Effect of ERNiFeCr-2 Filler Metal on Solidification Cracking Susceptibility of CM247LC Superalloy Welds
ERNiFeCr-2 용가재 적용에 따른 CM247LC 초내열합금 용접부 응고균열 민감도 변화 거동
Kyeong-Min Kim, Hye-Eun Jeong, Ye-Seon Jeong, Uijong Lee, Hyungsoo Lee, Seong-Moon Seo, Eun-Joon Chun
김경민, 정혜은, 정예선, 이의종, 이형수, 서성문, 천은준
Korean J. Met. Mater. 2021;59(10):698-708.   Published online 2021 Sep 6
DOI: https://doi.org/10.3365/KJMM.2021.59.10.698

The metallurgical aspects of weld solidification cracking in Ni-based superalloys (with Ti+Al > 5 mass%) have not been widely investigated thus far. Herein, the solidification cracking susceptibility of the CM247LC superalloy and its welds with ERNiFeCr-2 filler wire was quantitatively evaluated using a novel modified Varestraint testing method, for the..... More

                           Cited By 1
Effect of Cladding Conditions on Solidification Cracking Behavior during Dissimilar Cladding of Inconel Alloy FM 52 and 308L Stainless Steel to Carbon Steel: Evaluation of Solidification Brittle Temperature Range by TransverseVarestraint Test
인코넬 FM52 및 308L 스테인리스강을 이용한 탄소강 이종 클래딩 및 공정변수에 따른 응고균열 발생 거동 변화: Transverse-Varestraint 시험을 이용한 응고취성 온도범위 평가
Yookyung Kim, Byungrok Moon, Namhyun Kang, Eun-Joon Chun
김유경, 문병록, 강남현, 천은준
Korean J. Met. Mater. 2020;58(6):403-412.   Published online 2020 May 14
DOI: https://doi.org/10.3365/KJMM.2020.58.6.403

In this study, solidification cracking behavior and susceptibility in dissimilar cladding of Inconel alloy FM 52, 308L stainless steel to carbon steel, was investigated by submerged arc welding and transverse−Varestraint testing with gas tungsten arc welding. The effect of cladding conditions on cracking behavior and susceptibility was extensively evaluated, and..... More

                           Cited By 3
Microstructural Evolution with Solidification Rate and Heat-Treatment of Single Crystal Superalloy CMSX-4 Grown using Seed
Seed를 이용한 단결정 초내열합금 CMSX-4에서 응고속도 및 열처리에 따른 미세조직 변화
Suncheol Kwon, Jongho Shin, Geunyoung Rim, Gitae Sung, Byunggwan Yoon, Euisuk Jung, Jehyun Lee
권순철, 신종호, 임근영, 성기태, 윤병관, 정의석, 이재현
Korean J. Met. Mater. 2018;56(10):745-754.   Published online 2018 Oct 5
DOI: https://doi.org/10.3365/KJMM.2018.56.10.745

The CMSX-4 superalloy including refractory elements was directionally solidified using the seed of a [001] single crystal to control the growth direction to [001], where solidification velocity was changed from 25 to 160 μm/s. In the log-log plot between spacing and solidification velocity, the primary dendrite arm spacing and secondary..... More

                           Cited By 2
Prediction of Primary Dendrite Arm Spacing with Solidification Velocity and Temperature Gradient during Directional Solidification in CMSX-4 Superalloy
CMSX-4 초내열합금에서 일방향 응고속도와 온도경사의 변화에 따른 1차 수지상 간격 예측
Jongho Shin, Changhoon Sung, Suncheol Kwon, Sukhwan Kwon, Byungmoon Chang, Jehyun Lee
신종호, 성창훈, 권순철, 권석환, 장병문, 이재현
Korean J. Met. Mater. 2018;56(9):674-679.   Published online 2018 Sep 5
DOI: https://doi.org/10.3365/KJMM.2018.56.9.674

Directional solidification experiments were carried out to estimate the effect of solidification velocity and temperature gradient on primary dendrite arm spacing (PDAS) in the Ni-based superalloy, CMSX-4 alloy. The specimens were solidified at velocities of 1, 5, 25, 50 and 100 mm/s under given temperature gradients of 12.5, 18, 23..... More

                           Cited By 2
Formation of Delta Ferrite with Solidification Rates in 10Cr1MoW Steel
10Cr1MoW강에서 응고속도에 따른 δ 페라이트 형성거동
Suncheol Kwon, Yunkon Joo, Changhoon Sung, Myunggyun Son, Jongho Shin, Seongmoon Seo, Jehyun Lee
권순철, 주윤곤, 성창훈, 손명균, 신종호, 서성문, 이재현
Korean J. Met. Mater. 2018;56(8):589-596.   Published online 2018 Aug 5
DOI: https://doi.org/10.3365/KJMM.2018.56.8.589

Martensitic 10Cr1MoW steels are widely used for high temperature components in turbine engines because they have good mechanical properties and corrosion resistance. Delta-ferrite can form locally in large ingots and the ferrite phase degrades the metal’s high-temperature properties. To decrease the fraction of delta-ferrite the solidification process should be controlled...... More

Effects of Welding Consumables on the Solidification Cracking in SAW Weld Metal of Medium Carbon Steel
중탄소강 SAW 용접금속의 응고 균열 발생에 미치는 용접재료의 영향
Kook-soo Bang, Woo-hyun Song, Hong-chul Jung
방국수, 송우현, 정홍철
Korean J. Met. Mater. 2018;56(2):137-145.   Published online 2018 Feb 5
DOI: https://doi.org/10.3365/KJMM.2018.56.2.137

The effects of submerged-arc welding consumables, wire and flux, on solidification cracking in the weld metal of medium-carbon steel were investigated. It showed that weld metal with a greater amount of C, S, and P had a wider brittleness temperature range, BTR, which resulted in longer total and maximum crack..... More

Enhanced Mechanical Properties by Directional Solidification and Cold Drawing in Cu Added Zn-Al Alloys
Cu가 첨가된 Zn-Al 합금에서 일방향응고 및 냉간인발에 따른 기계적 특성 향상
Hae Chang Jeong, Min Soo Kim, Jee Hyuk Ahn, Sung Hwan Lim, Seung Zeon Han, Jehyun Lee, Kwang Ho Kim
정해창, 김민수, 안지혁, 임성환, 한승전, 이재현, 김광호
Korean J. Met. Mater. 2017;55(8):529-536.   Published online 2017 Aug 1
DOI: https://doi.org/10.3365/KJMM.2017.55.8.529

The lamellar structure of two phases, the Zn-rich and Al-rich phases, is formed in a Zn-5 wt% Al eutectic alloy. In order to study the effect of microstructural changes on the tensile properties of eutectic Zn-Al binary alloy, Zn-Al and Zn-Al-Cu alloys were directionally solidified at a growth rate of..... More

Capture and Solidification of Rare Earth Nuclide (Nd) in LiCl-KCl Eutectic Salt Using a Synthetic Inorganic Composite
무기합성매질을 이용한 LiCl-KCl 공융염 내 희토류 핵종(Nd)의 포집 및 고화
Na-Young Kim, Hee-Chul Eun, Hwan-Seo Park, Do-Hee Ahn
김나영, 은희철, 박환서, 안도희
Korean J. Met. Mater. 2017;55(6):419-426.   Published online 2017 Jun 1
DOI: https://doi.org/10.3365/KJMM.2017.55.6.419

In this study, neodymium (Nd) nuclides in LiCl-KCl eutectic salts were captured and solidified using a synthetic inorganic composite (Li2O-SiO2-Al2O3-B2O3), a process that allows the selective capture of Nd and fabrication of a composite with Nd captured from waste, without additional additives or mixing. The Nd nuclides in the LiCl-KCl..... More

Simulation and Experimental Study on the Steady Conduction Solution for Continuous Rheo-Casting for A356 Alloy
Do Minh Duc, Nguyen Hong Hai, Pham Quang
Korean J. Met. Mater. 2017;55(3):202-208.   Published online 2017 Mar 3
DOI: https://doi.org/10.3365/KJMM.2017.55.3.202

Computational fluid dynamic modeling of a continuous rheo-casting technology was conducted, consistent with the manufacturing of 3 mm-thin plates made of aluminum alloy A356. The A numerical simulation on of the stabilizing time of the material crystallization was carried out using the ANSYS FLUENT code. Solidification and melting models were..... More

Evolution of the Solidification Microstructures in Directionally Solidified CM247LC Rod
CM247LC 초내열합금에서 일방향응고에 따른 응고조직 변화
Jeongseok Lee, Seokhwan Kown, Byunggwan Yoon, Byungmoon Chang, Yongil Jung, Jehyun Lee
이정석, 권석환, 윤병관, 장병문, 정연길, 이재현
Korean J. Met. Mater. 2016;54(11):838-845.   Published online 2016 Nov 5
DOI: https://doi.org/10.3365/KJMM.2016.54.11.838

Directional solidification of CM247LC was performed at a constant growth velocity (300 mm/h) using a Bridgman type furnace. Microstructural features, including the number of grains, PDAS, and EBSD IPF map, were investigated with progressive positions from the starter block. As directional solidification proceeded, the number of grains decreased and PDAS..... More

         Cited By 4
Casting/Solidification/Heat Treatment
Solidification Segregation and Homogenization Behavior of 1Cr-1.25Mo-0.25V Steel Ingot
1Cr-1.25Mo-0.25V 강 잉곳의 응고편석 및 균질화 거동
Dong-Bae Kim, Young-Sang Na, Seong-Moon Seo, Je-Hyun Lee
김동배, 나영상, 서성문, 이재현
Korean J. Met. Mater. 2016;54(9):659-671.   Published online 2016 Sep 5
DOI: https://doi.org/10.3365/KJMM.2016.54.9.659

As a first step to optimizing the homogenization heat treatment following high temperature upset forging, the solidification segregation and the homogenization behaviors of solute elements were quantitatively analyzed for 1Cr-1.25Mo-0.25V steel ingot by electron probe micro-analysis (EPMA). The random sampling approach, which was designed to generate continuous compositional profiles of..... More

1 |
Email Alert
Author's Index
Impact factor
The Korean Institute of Metals and Materials
SCImago Journal & Country Rank
Similarity Check
Crossref Cited-by Linking
Editorial Office
The Korean Institute of Metals and Materials
6th Fl., Seocho-daero 56-gil 38, Seocho-gu, Seoul 06633, Korea
TEL: +82-2-557-1071   FAX: +82-2-557-1080   E-mail: metal@kim.or.kr
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Institute of Metals and Materials.                 Developed in M2PI