| Home | E-Submission/Review | Sitemap | Editorial Office |  
top_img
Korean Journal of Metals and Materials Search > Browse Articles > Search



Characterization of Microstructures and Creep Fracture Characteristics of Dissimilar Metal Welds between Inconel 740H Ni-Based Superalloy and Gr.92 Ferritic Steel
니켈기 Inconel 740H 초내열합금과 고Cr계 Gr.92 내열강의 이종금속 용접부의 미세조직 및 크리프 파단 특성
Kyeong-Yong Shin, Ji-Won Lee, Jung-Min Han, Kyong-Woon Lee, Byeong-Ook Kong, Hyun-Uk Hong
신경용, 이지원, 한정민, 이경운, 공병욱, 홍현욱
Korean J. Met. Mater. 2018;56(5):375-383.   Published online 2018 May 8
DOI: https://doi.org/10.3365/KJMM.2018.56.5.375

Abstract
Microstructure evolution and the creep fracture characteristics of dissimilar welds between Ni-based superalloy Inconel 740H and High Cr ferritic steel Gr.92 were investigated. The dissimilar welds were fabricated by shielded metal arc (SMA) welding process with Ni-based austenitic Inconel 182 superalloy. Postweld heat treatment at 760 oC for 4 hours..... More

         Cited By 5
Microstructural Evolutions of 22Cr-9Mo-3Fe-4Nb Nickel-Base Superalloy During Low Cycle Fatigue
22Cr-9Mo-3Fe-4Nb 니켈기 초내열합금의 저주기 피로에 따른 미세조직변화
Youngseok Song, Jinik Suk, Chung Yun Kang
송영석, 석진익, 강정윤
Korean J. Met. Mater. 2017;55(9):609-614.   Published online 2017 Aug 30
DOI: https://doi.org/10.3365/KJMM.2017.55.9.609

Abstract
A new Ni based superalloy with high fatigue resistance and fine grain was considered as a material for high-pressure buckets in fossil fuel power plants. Since such buckets are usually exposed to extreme operating conditions, low cycle fatigue tests were conducted to understand the microstructure evolution of the material during..... More

      
Microstructure and High Temperature Plastic Deformation Behavior of Al-12Si Based Alloy Fabricated by an Electromagnetic Casting and Stirring Process
전자기주조법으로 제조된 Al-12Si계 합금의 미세조직 및 고온 소성변형 거동
Kyung-Soo Jeon, Heung-Ryeol Roh, Mok-Soon Kim, Jong-Ho Kim, Joon-Pyo Park
전경수, 노흥렬, 김목순, 김종호, 박준표
Korean J. Met. Mater. 2017;55(6):386-395.   Published online 2017 Jun 1
DOI: https://doi.org/10.3365/KJMM.2017.55.6.386

Abstract
An as-received EMC/S (electromagnetic casting and stirring)-processed Al-12Si based alloy billet was homogenized to examine its microstructure and high temperature plastic deformation behavior, using compressive tests over the temperature range from 623 to 743 K and a strain rate range from 1.0×10-3 to 1.0×100s-1. The results were compared with samples..... More

      
High-temperature Corrosion of AlCrTiSiN Film in Ar-1%SO<sub>2</sub> Gas
Poonam Yadav, Sik Chol Kwon, Yue Lin, Shihong Zhang, Dong Bok Lee
Korean J. Met. Mater. 2017;55(4):222-226.   Published online 2017 Apr 6
DOI: https://doi.org/10.3365/KJMM.2017.55.4.222

Abstract
An AlCrTiSiN film composed of 31Al-15Cr-1.7Ti-0.5Si-51.8N (at%) was deposited on a steel substrate by arc ion plating to a thickness of 1 μm. It consisted of nano crystalline hcp-AlN and fcc-CrN. Its corrosion behavior in Ar-1%SO2 gas at 800 ℃ for 5-50 h was studied. The resulting scales consisted primarily..... More

      
Temperature Dependency of the Tensile Characteristics and Transition of Fracture Behaviors in a Novel Infiltrated TiC-SKD11 Composites
TiC-SKD11 함침 복합재의 온도에 따른 인장 특성과 파괴거동 변화
Nu-Ri Oh, Sang-Kwan Lee, Seung-Chan Cho, Il-Guk Jo, Keum-Cheol Hwang, Dae-Ha Kim, Young-Tae Cho, Dong-Woo Suh, Hyun-Uk Hong
오누리, 이상관, 조승찬, 조일국, 황금철, 김대하, 조영태, 서동우, 홍현욱
Korean J. Met. Mater. 2017;55(3):156-164.   Published online 2017 Mar 3
DOI: https://doi.org/10.3365/KJMM.2017.55.3.156

Abstract
A composite having 60 vol% of TiC particles was successfully fabricated by the infiltration of molten SKD11 tool steel into a TiC preform. The density of this composite was achieved to be 25% lighter than conventional steels. The penetration of the liquid metal reached geometrically complex regions without any interfacial..... More

      
Materials Analysis & Characterization
Transmission Electron Microscopic Analysis of Micro-Twin
미세쌍정의 투과전자현미경 해석
Kun Kul Ryoo, Mi-young Ha, Kang Deuk Lee
류근걸, 하미영, 이강득
Korean J. Met. Mater. 2016;54(9):711-715.   Published online 2016 Sep 5
DOI: https://doi.org/10.3365/KJMM.2016.54.9.711

Abstract
Micro-twinning has been investigated in some state-of-the-art materials by transmission electron microscopy, but such characterizations have not been clear so far. Micro-twins must be characterized by identifying their spots in the electron diffraction pattern, which is very unique compared to normal defects such as dislocations or stacking..... More

         Cited By 1
1 |
E-Submission
Email Alert
Author's Index
Specialties
Impact factor
The Korean Institute of Metals and Materials
SCImago Journal & Country Rank
Scopus
GoogleScholar
Similarity Check
Crossref Cited-by Linking
KOFST
COPE
Editorial Office
The Korean Institute of Metals and Materials
6th Fl., Seocho-daero 56-gil 38, Seocho-gu, Seoul 06633, Korea
TEL: +82-2-557-1071   FAX: +82-2-557-1080   E-mail: metal@kim.or.kr
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Institute of Metals and Materials.                 Developed in M2PI