Abstract
In this study, a high-melting point element, tantalum carbide (TaC) was added to improve the mechanical properties and the oxidation/corrosion resistance of Fe. The Fe-TaC composites were synthesized by high energy ball milling for the mechanical alloying of the non-equilibrium phase (Fe-Ta) and the homogeneous dispersion of TaC. Fe-TaC composite..... More

Abstract
In this study, Binderless-WC hard materials were fabricated using the pulsed current activated sintering (PCAS) process for a Friction Stir Welding tool and difficult-to-cut tool application. Tungsten carbide (WC) hard materials are used in various industries and possess a superior hardness compared to other hard materials. They have particularly high..... More

Abstract
In this study, planetary ball milled WC-5 wt%Co powders were sintered using the pulsed current activated sintering (PCAS) process. With this process, fully densified hard materials were obtained in a shorter time than conventional processes such as a HP and HIP. The particle sizes of the planetary ball milled WC..... More

Abstract
In this study, Al alloy targets were fabricated using the powder metallurgy (pulsed current activated sintering, PCAS) process for metal PVD coating target applications. Powders were prepared from Al, Si and Cu ingots for sintering Al alloy compacts using the gas atomizing process. To fabricate the gas atomized Al alloy..... More

Abstract
In this paper, Cu-coated graphite powders for a low thermal expansion coefficient and a high thermal conductivity are fabricated using a chemical reaction process. The Cu particles adhere to the irregular graphite powders and they homogeneously disperse in the graphite matrix. Cu-coated graphite powders are coarser at approximately 3~4 ㎛..... More