| Home | E-Submission/Review | Sitemap | Editorial Office |  
top_img
Korean Journal of Metals and Materials Search > Browse Articles > Search



Evaluation of Liquation Cracking Susceptibility of CM247LC Superalloy Repair Welds via Pre-Weld Varestraint Test
Pre-weld Varestraint 시험을 이용한 CM247LC 초내열합금 보수용접부 액화균열 민감도 평가
Ye-Seon Jeong, Jingon Jeong, Se-Yun Kim, Sung-Hwan Bae, Uijong Lee, Hyungsoo Lee, Seong-Moon Seo, Eun-Joon Chun
정예선, 정진곤, 김세윤, 배성환, 이의종, 이형수, 서성문, 천은준
Korean J. Met. Mater. 2022;60(4):272-281.   Published online 2022 Mar 28
DOI: https://doi.org/10.3365/KJMM.2022.60.4.272

Abstract
In this study, the liquation cracking susceptibility in the heat-affected zone of CM247LC superalloy gas turbine blades during repair welding was quantitatively evaluated using a newly developed pre-weld Varestraint test method. The repair welding geometry was replicated through Varestraint tests for the pre-weld bead. The liquation cracking susceptibility, that is,..... More

                        
Effect of ERNiFeCr-2 Filler Metal on Solidification Cracking Susceptibility of CM247LC Superalloy Welds
ERNiFeCr-2 용가재 적용에 따른 CM247LC 초내열합금 용접부 응고균열 민감도 변화 거동
Kyeong-Min Kim, Hye-Eun Jeong, Ye-Seon Jeong, Uijong Lee, Hyungsoo Lee, Seong-Moon Seo, Eun-Joon Chun
김경민, 정혜은, 정예선, 이의종, 이형수, 서성문, 천은준
Korean J. Met. Mater. 2021;59(10):698-708.   Published online 2021 Sep 6
DOI: https://doi.org/10.3365/KJMM.2021.59.10.698

Abstract
The metallurgical aspects of weld solidification cracking in Ni-based superalloys (with Ti+Al > 5 mass%) have not been widely investigated thus far. Herein, the solidification cracking susceptibility of the CM247LC superalloy and its welds with ERNiFeCr-2 filler wire was quantitatively evaluated using a novel modified Varestraint testing method, for the..... More

                           Cited By 1
Evaluation and Control of Liquation Cracking Susceptibility for CM247LC Superalloy Weld Heat-Affected Zone via Visualization-Based Varestraint Test
가시화 기반 Varestraint 시험을 이용한 CM247LC 초내열합금 용접 열영향부의 액화균열 민감도 평가 및 제어
Ye-Seon Jeong, Kyeong-Min Kim, Hyungsoo Lee, Seong-Moon Seo, Eun-Joon Chun
정예선, 김경민, 이형수, 서성문, 천은준
Korean J. Met. Mater. 2021;59(7):445-458.   Published online 2021 Jun 11
DOI: https://doi.org/10.3365/KJMM.2021.59.7.445

Abstract
The metallurgical aspects of weld cracking in Ni-based superalloys remain relatively unexplored in existing research. The present study performed comprehensive metallurgical and manufactural investigations into the weldability of an Ni-based superalloy, CM247LC, from the viewpoint of the liquation cracking behavior and its susceptibility. Metallurgical solutions to suppress the liquation-cracking susceptibility..... More

                           Cited By 1
Evaluation of Liquation Cracking Behavior and Susceptibility in Heat-Affected Zone of CM247LC Superalloy Welds for Turbine Blade Application
CM247LC 초내열합금 터빈 블레이드 용접 열영향부의 액화균열 발생 거동 및 민감도 평가
Ye-Seon Jeong, Kyeong-Min Kim, Uijong Lee, Hyungsoo Lee, Seong-Moon Seo, Eun-Joon Chun
정예선, 김경민, 이의종, 이형수, 서성문, 천은준
Korean J. Met. Mater. 2020;58(12):875-886.   Published online 2020 Dec 4
DOI: https://doi.org/10.3365/KJMM.2020.58.12.875

Abstract
In this study, the weldability of the as-cast CM247LC superalloy for turbine blade applications was metallurgically evaluated in terms of its hot cracking behavior and susceptibility. For this purpose, a real blade was manufactured using a directional solidification casting process, and gas tungsten arc welding was performed at the tip..... More

                           Cited By 5
Effect of Aging Heat Treatment Conditions on the Mechanical Properties and Microstructure of Base and Weld Metal of Alloy 282 Superalloy
Alloy 282 초내열합금 모재 및 용접부의 기계적 특성과 미세조직에 미치는 시효열처리 조건의 영향
Jinhyeok Bang, Yongjoon Kang, Namkyu Kim, Seong-Moon Seo, Sanghoon Lee, Sangwoo Song, Namhyun Kang
방진혁, 강용준, 김남규, 서성문, 이상훈, 송상우, 강남현
Korean J. Met. Mater. 2020;58(8):540-549.   Published online 2020 Jul 27
DOI: https://doi.org/10.3365/KJMM.2020.58.8.540

Abstract
The effect of aging heat treatment conditions on the mechanical properties and microstructure of the base and weld metal of Alloy 282 superalloy was investigated. The aging heat treatment conditions employed in this study were as follows: two-steps (1010 °C for 2 hours plus 788 °C for 8 hours) and..... More

                           Cited By 1
Influence of Boron and Manganese on Hot Crack Resistance and Low Temperature Toughness of Flux Cored Arc Weld Metal for High Strength Carbon Steels
고강도 탄소강 FCA 용착금속의 고온균열 저항성과 저온 충격인성에 미치는 보론과 망간의 영향
Su-Kil Park, Young-Ho Cho, Chun-Ho Jee, Junghoon Lee, Seong-Moon Seo, Namhyun Kang
박수길, 조영호, 지춘호, 이정훈, 서성문, 강남현
Korean J. Met. Mater. 2019;57(1):28-37.   Published online 2018 Dec 14
DOI: https://doi.org/10.3365/KJMM.2019.57.1.28

Abstract
The hot crack resistance and mechanical properties of flux cored arc (FCA) welds were investigated with three kinds of welding consumables having different boron (B) and manganese (Mn) contents for high strength carbon steel. The hot crack resistance, measured from self-restraint testing, strongly depended on the amount of B in..... More

                           Cited By 3
Casting/Solidification/Heat Treatment
Solidification Segregation and Homogenization Behavior of 1Cr-1.25Mo-0.25V Steel Ingot
1Cr-1.25Mo-0.25V 강 잉곳의 응고편석 및 균질화 거동
Dong-Bae Kim, Young-Sang Na, Seong-Moon Seo, Je-Hyun Lee
김동배, 나영상, 서성문, 이재현
Korean J. Met. Mater. 2016;54(9):659-671.   Published online 2016 Sep 5
DOI: https://doi.org/10.3365/KJMM.2016.54.9.659

Abstract
As a first step to optimizing the homogenization heat treatment following high temperature upset forging, the solidification segregation and the homogenization behaviors of solute elements were quantitatively analyzed for 1Cr-1.25Mo-0.25V steel ingot by electron probe micro-analysis (EPMA). The random sampling approach, which was designed to generate continuous compositional profiles of..... More

      
1 |
E-Submission
Email Alert
Author's Index
Specialties
Impact factor
The Korean Institute of Metals and Materials
SCImago Journal & Country Rank
Scopus
GoogleScholar
Similarity Check
Crossref Cited-by Linking
KOFST
COPE
Editorial Office
The Korean Institute of Metals and Materials
6th Fl., Seocho-daero 56-gil 38, Seocho-gu, Seoul 06633, Korea
TEL: +82-2-557-1071   FAX: +82-2-557-1080   E-mail: metal@kim.or.kr
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Institute of Metals and Materials.                 Developed in M2PI