Abstract
Residual antibiotics in natural aquatic environments pose a critical threat to humans and other organisms. However, most sewage treatment plants fail to remove them. Photocatalytic nanomaterials can efficiently destroy these persistent organic pollutants in wastewater. In this study, we developed a series of cobalt-doped SrTiO₃ (Co-STO) catalysts with different doping..... More

Abstract
The drawing process severely deforms commercial AA1070 alloy for electrical wire, reducing a rod from a diameter of 2.0 mm to 0.4 mm, followed by annealing. The annealing process was conducted at various temperatures ranging from 200℃ to 450℃, with each temperature maintained for 1hour. The effects of increasing annealing..... More

Abstract
This study aims to comprehensively understand the effects of changes in the chemical composition and size of attached particles on the resulting assimilation characteristics during the sintered ore production process. By evaluating the penetration depth and changes in the chemical composition in the assimilated region of the iron ore and..... More

Abstract
Nitrogen dioxide (NO₂) is a highly dangerous gas, mostly emitting emitted from fossil fuels, and a major contributor to air pollution. It has negatively effects affects on the human health as well asand contributes to environmental issues like acid rain. In this study, mesoporous CuO_x nanoparticles (NPs) were successfully synthesized..... More

Abstract
We employed electrophoretic deposition (EPD) using AC voltage to prepare lithium iron phosphate (LFP) Li-ion battery electrodes with varying the LFP thickness, to compare bulk-limited electro chemical reaction with the surface-limited electrochemical reactions. We analyzed the electrochemical performances of the thin and thick LFP electrodes at various scan rates. They..... More

Abstract
The stacking fault energy (SFE) of face-centered cubic (FCC) alloys is a critical parameter that controls microstructural and crystallographic texture evolution during deformation and annealing treatments. This review focuses on several FCC alloys, aluminum (Al), copper (Cu), austenitic stainless steels (ASSs), and high entropy alloys (HEAs), all of which exhibit..... More

Abstract
Skutterudite compounds have excellent thermoelectric performance in the intermediate-to high temperature range. Their lattice thermal conductivity can be reduced by intensifying phonon scattering through independent vibrations of the guest atoms, by filling the voids within the lattice. Furthermore, the thermoelectric figure of merit (ZT) can be enhanced by optimizing the..... More

Abstract
In this study, thermoelectric chalcostibite (CuSbS₂) compounds were fabricated using mechanical alloying (MA) and hot pressing (HP), and phase identification, microstructural observation, and thermal analysis were conducted. The thermal properties were then measured and compared with those of other Cu–Sb–S ternary compounds synthesized by the same solid-state process, namely, skinnerite..... More

Abstract
This research explores how aggregation influences the electrical behavior at both the planar - heterojunction poly(3-hexylthiophene) (P3HT)/SiO2 and P3HT/ZnO nanocrystal (NC) interfaces. The formation of H- and J-type aggregates leads to distinct molecular ordering and packing structures, manifesting as changes in threshold voltage shifts (electrical gating) as well as absorption..... More

Abstract
Because n-type Bi₂Te₃-based materials exhibit lower thermoelectric performance than p-type materials and because their thermoelectric properties are sensitively changed by the composition and carrier concentration, optimizing these aspects in n-type materials is necessary to improve the thermoelectric figure of merit (ZT). In this study, the thermoelectric performance of n-type Bi₂Te₃-based..... More

Abstract
This study explores Mg-composition dependent cycle stability in a Zn_1-xMg_xO Li-ion battery, where battery cycles transition from an electronic transport-limited to an ionic transport limited regime. We investigated the impact of Mg doping in Zn_1-xMg_xO nanocrystals on Li-ion battery performance, focusing on Mg compositions between x=0.05 and x=0.15. Mg composition..... More

Abstract
A Cu-based paste containing Cu formate and Cu particles was prepared for the compressionassisted sinter-bonding of Cu-finished wide-bandgap power devices onto a Cu-finished substrate at a relatively low bonding temperature of 250 oC in air. A mixture of Cu formate and Cu particles was designed to mitigate the tremendous volume..... More

Abstract
In this study, we enhanced the flexural strength of cordierite ceramics by incorporating h-BN (hexagonal boron nitride) nanoparticles, facilitated by the slip casting process. Initially, commercial cordierite powder with an average particle size of 10 mm underwent a ball-milling process to reduce the size to 2.5 mm and simultaneously achieve..... More

Abstract
To improve the hydrogen-storage properties of Mg₂Ni, LiBH₄ was added by milling in hydrogen atmosphere (reactive mechanical milling, RMM). Mg₂Ni-10LiBH₄ was prepared with a composition of 90 wt% Mg₂Ni + 10 wt% LiBH₄. The quantity of released hydrogen (H_r) versus temperature T curve for Mg₂Ni10LiBH₄ was obtained by heating at..... More

Abstract
Poly(3-hexylthiophene) (P3HT), a semiconducting polymer, is integral to the development of organic electronic devices. Its optoelectronic properties are significantly influenced by the nature of its intermolecular interactions, predominantly classified as J-type and H-type couplings. This study investigates the effect of sonication on the dielectric properties of P3HT, focusing on the..... More

Abstract
: This study investigates the influence of surfactant (sodium dodecyl sulfate, SDS) concentration on the size and optoelectronic properties of poly(3-hexylthiophene) (P3HT) nanoparticles (NPs) synthesized via the mini-emulsion technique. P3HT NPs were fabricated with varying SDS concentrations. The size dependent optoelectronic properties, including the highest occupied molecular orbital (HOMO) and..... More

Abstract
Bis(2,4,4-trimethylpentyl)phosphinic acid (Cyanex 272) is known to selectively extract Au(III) from dilute to concentrated hydrochloric acid solutions. Therefore, Cyanex 272 can be employed in the separation of Au(III) from the hydrochloric acid leaching solutions of secondary resources containing gold metal. This work identified the extraction reaction of Au(III) by Cyanex..... More

Abstract
This research elucidates the intricate interplay of lithium content, oxygen pressure, and temperature and their influence on the electrical properties of Lithium-doped zinc oxide (LZO). The electrical behavior of zinc oxide (ZnO), a prominent semiconductor material, can be modulated when doped with lithium (Li). Through systematic experimentation, we demonstrate that..... More

Abstract
Carbon fiber reinforced polymer (CFRP) has been extensively used in civil engineering for applications such as reinforcing and retrofitting various architectural materials. Therefore, understanding the degradation of CFRP under high temperatures is important. This study aims to investigate the thermomechanical and microstructural properties of CFRP plates at elevated temperatures up..... More

Abstract
Commercial AA1070 alloy for electrical wire is severely deformed by the drawing process when a rod with a diameter of 2 mm is greatly reduced to 0.4 mm by multi-pass. Changes in the microstructure, mechanical properties, and electrical properties of the Al alloy during the wire-drawing process were investigated in..... More

Abstract
SnSe₂ alloys have been investigated in recent times as potential n-type thermoelectric materials. In this study, the thermoelectric transport properties of a series of Sb-doped SnSe₂, Sn(Se_1-xSb_x)₂ (x = 0, 0.015, 0.03, 0.045, 0.06) alloys are investigated. The electrical conductivity was generally enhanced with Sb doping owing to a large..... More

Abstract
The microstructure, tensile and fatigue properties of a martensitic stainless steel (MSS) plate with a thickness of 0.152 mm are investigated in this study. The microstructural properties were initially studied using electron backscatter diffraction microscopy. High dislocation densities were observed in the microstructure, along with the rolling texture revealed by..... More

Abstract
Glass fiber-reinforced polymers (GFRPs) have attracted significant attention as structural materials because of their high fatigue resistance, corrosion resistance, strength, and stiffness. This study examined the effect of elevated temperatures (150, 250, 350, and 450oC) on the microstructural and mechanical properties of GFRP plates. The number of bubbles increased as..... More

Abstract
Wet chemical analysis techniques for four elements (M = As, Pb, Sb, and Sn) in Ag – M binary alloys were investigated with emphasis on the choice of solvent acid and the characteristic wavelength used in the ICP-AES (Inductively-Coupled Plasma Atomic Emission Spectrometer) analysis. The elements are representative tramp elements..... More

Abstract
A cold roll-bonding (CRB) process is applied to study the effects of stacking number on the microstructure and mechanical properties of roll-bonded and age-treated Al sheets. Commercial AA1050 and AA6061 sheets with a thickness of 2 mm were stacked alternately on each other to two and four layers, and roll-bonded..... More

Abstract
Lithium-ion batteries (LIBs) have undergone countless enhancements in the past decade, mainly improvements in the basic components: electrodes, electrolyte, and separator. The separator, which acts as a physical barrier between the two electrodes, does not directly participate in the charge and energy storage. However, it is involved in the safety, form..... More

Abstract
Recently, transition metal dichalcogenides (TMDCs) with 2D structure have attracted interest due to their many unique optical and electrical properties. The primary preparation methods for 2D materials are chemical vapor deposition (CVD), exfoliation, and other vacuum technologies. Large-scale synthesis of WS₂ via solution-process is rare due to the higher temperature..... More

Abstract
A356 cast aluminum alloy contains 7 at.% Si and 0.3 at.% Mg, producing an approximately 50% eutectic microstructure. This high Si content and various casting conditions play a significant role in strengthening A356 alloy, by controlling the eutectic morphology and precipitates of other intermetallic compounds. Understanding how Si-related precipitates and..... More

Abstract
Cu₃Sb_1–x–yGe_xIn_ySe₄ (0.02 ≤ x ≤ 0.12; 0.04 ≤ y ≤ 0.08) permingeatite compounds doped with Ge and In were prepared using solid-state synthesis. The phases and microstructures were analyzed, and the charge transport and thermoelectric properties were evaluated according to the Ge and In doping content. Most of the samples..... More

Abstract
The degree to which parameters affect the spheroidization heat treatment of steel was calculated by setting the spheroidization heat treatment conditions of Cr-Mo steel and using data analysis such as S/N ratio and ANOVA. After analyzing the transformation temperatures of the steel, A_c1 and A_c3 , using a DSC, the..... More