Abstract
This study was carried out to investigate the effect of fatigue stress magnitude on the tensile properties of the damaged Fe – 22Mn – 12Cr – 3Ni – 2Si – 4Co damping alloy under various fatigue stress magnitudes. α´ and ε-martensite were formed by fatigue stress in the Fe –..... More

Abstract
Zn-Al-Mg alloy galvanized steel sheets have excellent corrosion resistance and improved cut-edge corrosion resistance. Most of the galvanized steel sheets used for outdoor applications are coated again on the galvanizing layer, or after a plastic film is laminated. As the corrosion products formed by the corrosion of Zn accumulate over..... More

Abstract
Memristors have been extensively investigated as the fourth fundamental circuit element. Titanium oxide is a common material used to fabricate memristors. In this paper, we investigated the influence of the thickness of the oxide active layer on the Al/TiO2-x/TiO2/heavily doped electrode memristor architecture. An insulating TiO2 thin-film was deposited using..... More

Abstract
The critical role of the thicknesses of the top and bottom oxide layers, as well as Ag layer, in ZnO/Ag/ZnO transparent conductive electrodes were investigated. The Ag forms a nearly continuous layer at the thickness of 8 nm, at which the Ag sheet resistance of 8.0 Ω/Sq. is lower than..... More

Abstract
Among several candidates for nanoenergetic materials and systems, nanoscale reactive multilayer foils (NRMF) or bimetallic nano-laminates are highly promising candidates. They provide the highly desirable pyrotechnical properties of high energy density and reaction sensitivity as well as flexible tunability. They could be useful in various fields of explosive and propellant..... More

Abstract
As energy generation by recycling biomass has become increasingly attractive, research on biomass recycling has focused on improving operational efficiency. To develop a new material composition for the inner wall of a biomass boiler, we investigated the effect of Cr and Ni addition on the resistance of the α-iron (100)..... More

Abstract
The compression process is one of the more widely used industrial manufacturing methods for fabricating desired shape of specimens with various materials such as metals and ceramics. In the compaction process, the upper punch moves into the powder, and force is transmitted between particles, then achieving densification. In this process,..... More

Abstract
In micro/nano electro-mechanical system, silicon nitride (SiNx) membrane has been widely used in sensors, energy harvesting and optical filters because of its mechanical/chemical stability. However, it is necessary to verify mechanical and thermal properties of nanoscale SiNx membranes to ensure the desirable reliability and durability of a device because the..... More