Abstract
The precipitation characteristics of hydrides in Zr-2.5% Nb pressure tube material were investigated for various hydrogen concentrations and homogenization temperatures. A surface hydride was formed using the electrolytic method and homogenized at various temperatures up to at 550 oC. The homogenization treatment was carried out at 300-550 oC over 240..... More

Abstract
Aluminum alloys have been widely used for aerospace applications due to their high strength and lightweight. New demand is growing for aluminum alloys with high temperature mechanical properties that can sustain plastic deformation at high temperature. In this study, correlations among microstructure, tensile properties and Charpy impact properties were analyzed..... More

Abstract
The additive manufacturing (AM) process is a production technology process that has recently attracted attention. Among AM processes, the binder jetting (BJ) method is advantageous because it allows both wide material selection and design freedom. However, the output arrangement, which determines the direction in which the binder is injected during..... More

Abstract
ASTM P91 steel (viz. 9Cr-1Mo steel) was hot-dip aluminized to form a ~70 μm thick coating, and was then corroded in N2/0.1%H2S gas for 50 h at 800 and 900 ºC, to study the effect of aluminizing on the corrosion resistance of P91 steel in highly corrosive H2S environments. Before..... More

Abstract
Copper leaching from low-grade copper ore samples obtained from two active mines in the US, named conichalcite (sample A) and chalcopyrite (sample B), were studied under different leaching conditions using sulfuric acid and methane sulfonic acid (MSA). The conichalcite, sample A, is calcium-copper arsenite hydroxide [CaCu(AsO4)(OH)] with small amount of..... More

Abstract
We have developed an encapsulation technology for OLED devices using an LMPA sealing line to enhance barrier characteristics against moisture and oxygen penetration. To verify the potential of this technology for flexible OLED devices, three experimental factors were investigated in this study. First, the stability of the sealing line on..... More

Abstract
The effect of indium doping on zinc-tin oxide thin-film transistor was investigated using electrohydrodynamic (EHD) jet spray technology. EHD jet spray is a new and unique drop-on-demand patterning technology for printed electronics. After optimizing process parameters, the EHD jet spraying conditions were determined to be a voltage of 4.5 kV,..... More

Abstract
Higher manganese silicides (HMSs) MnSi1.74-1.75:Gem (m = 0.01–0.04) were prepared by solid-state reaction and hot pressing. The major phases of the HMSs were Mn27Si47 or Mn4Si7, and a small quantity of Si remained, but the intermetallic compound MnSi was not formed. The lattice constant increased with the substitution of Ge..... More

Abstract
Recently, directly emitted NOx upon start-up has been spotlighted as a significant emissions problem. BaO loaded V2O5-WO3/TiO2 Selective Catalytic Reduction (SCR) catalysts were synthesized with various contents of barium which was a representative NOx adsorbent and their NOx adsorption, desorption, and removal efficiency were shown. The phase of BaO was..... More