Abstract
To measure the mechanical properties of Sb₂S₃, a two-component compound semiconductor used in the light absorption layer of a solar cell, Sb₂S₃ thin films were formed on FTO glass using the spin coating method. The spin-coated Sb₂S₃ thin films were heat-treated at 200 ^oC in an Ar atmosphere for up..... More

Abstract
The behavior of dynamic strain aging (DSA) in a Zr-1.5Nb-0.4Sn-0.2Fe-0.1Cr alloy strip was investigated at temperature ranges of 25–600 °C via a tensile test. The tensile test was performed at two different strain rates 8.33 × 10^-5 and 1.67 × 10^-2 s^-1. The shear stress of the alloy strip revealed..... More

Abstract
In ironmaking, the optimal size of the iron ore charged into a blast furnace is generally 10-30 mm. Oversized ores, which have a smaller reaction surface area, are crushed, while undersized ores, which decrease permeability, undergo a sizing process before being charged into the blast furnace. Recently, however, iron ore..... More

Abstract
Hydrogen flowing into a weld causes hydrogen embrittlement (HE), so to prevent cold cracks in the weld, HE must be suppressed. In this study, single-pass fillet weldments were fabricated using two different welding fillers with the same strength level as the American Welding Society standard. The specimen F-HNi, which had..... More

Abstract
Cu-Pb and Cu-Sb alloys were prepared at various ratios, from 10:90 to 90:10, and leaching tests with sulfuric acid were conducted to investigate the effect of Pb and Sb on the leaching of Cu from speiss, which is obtained from the top submerged lance furnace process. The Cu leaching..... More

Abstract
This study analyzed the current state of technical development of the BF-based process, to determine ways to reduce carbon consumption. The technical features of the hydrogen reduction ironmaking process were also examined as a decarbonized ironmaking method, and related issues that should be considered when converting to hydrogen reduction are..... More

Abstract
Using thermoelectric refrigerators can address climate change because they do not utilize harmful greenhouse gases as refrigerants. To compete with current vapor compression cycle refrigerators, the thermoelectric performance of materials needs to be improved. However, improving thermoelectric performance is challenging because of the trade-off relationship between the Seebeck coefficient and..... More

Abstract
The Charpy impact test is used to identify the transition between ductility and brittleness. The percentages of ductile and brittle fractures in steel can be evaluated based on each fracture area, which is presently determined by an analyzer with the naked eye. This method may lead to subjective judgement, and..... More

Abstract
The properties of 6 mM urea added perovskite solar cells (PSCs) according to ZrO₂ electron transport layer (ETL) thicknesses of 204, 221, 254, and 281 nm were examined. A solar simulator was used to characterize the photovoltaic properties of the cell. Optical microscopy and field emission scanning electron microscope were..... More