| Home | E-Submission/Review | Sitemap | Editorial Office |  
Volume 57(12); Dec 2019
RSS feed
Research Papers
755 Microstructure and Mechanical Properties of Continuous Welded 50N Rail
Wookjin Choi, Min Ji Song, Nam-Hyoung Lim, Soo Yeol Lee
Korean J. Met. Mater. 2019;57(12):755-763.   Published online 2019 Dec 5
DOI: https://doi.org/10.3365/KJMM.2019.57.12.755

Rails are subjected to repeated stresses due to wheel-rail contact during train service. Rails under stress conditions undergo microstructural changes, and these cause degradations of the structural integrity and lifetime of rails. In this study, three different rails (newly-manufactured rail, newly-manufactured head-hardened rail, and worn (used) rail) were compared to..... More

764 Mechanical Properties and Fabrication of 4YSZ-BN Composites by Pulsed Current Activated Sintering
펄스 전류 활성 소결에 의한 4YSZ-BN 복합재료 제조와 기계적 성질
Woo-Jin Cho, Seong-Eun Kim, Se-Hoon Oh, In-Jin Shon
조우진, 김성은, 오세훈, 손인진
Korean J. Met. Mater. 2019;57(12):764-770.   Published online 2019 Nov 22
DOI: https://doi.org/10.3365/KJMM.2019.57.12.764

4YSZ is generally used in fuel cells, oxygen sensors, hip and knee joint replacements and thermal barriers because of it excellent properties, including low density, high biocompatibility, good resistance against corrosion, hard phase and high melting point, and high ionic conductivity. However, 4YSZ with large grain has low resistance to..... More

                           Cited By 1
771 Analysis of White Spots Formation on Autogeneous TIG Welds of Cryogenic Fe-36%Ni Steels
극저온용 Fe-36%Ni강 자동 용접부의 White spot 생성 원인 분석
Hee-keun Lee
Korean J. Met. Mater. 2019;57(12):771-777.   Published online 2019 Nov 22
DOI: https://doi.org/10.3365/KJMM.2019.57.12.771

Fe-36%Ni steels have a much lower thermal expansion coefficient than stainless steels and aluminum alloys for low temperature. They also have moderately high strength and good toughness at cryogenic temperatures because of its stable austenite phase. These excellent low temperature characteristics make this alloy attractive for cryogenic applications such as..... More

778 Effect of Hot Stamping Heat Treatment Temperature on Resistance Spot Weldability of Al-10% Si Coated 30MnB5 Steel
핫스탬핑 열처리 온도가 Al-10% Si 도금 30MnB5 강의 점용접성에 미치는 영향
Seong Guk Son, Yeonjung Hwang, Chang Wook Lee, Ji Hong Yoo, Minsu Choi
손성국, 황연정, 이창욱, 유지홍, 최민수
Korean J. Met. Mater. 2019;57(12):778-786.   Published online 2019 Oct 8
DOI: https://doi.org/10.3365/KJMM.2019.57.12.778

Hot stamping is the most efficient manufacturing process to produce high strength automotive parts with reduced springback. Recently, 30MnB5 steel has been developed for hot stamping steel which can provide above 1700 MPa. However, resistance spot weldability of this steel is insufficient due to the need for a large amount..... More

787 Comparison of the Extraction and Stripping Behavior of Iron (III) from Weak Acidic Solution Between Ionic Liquids and Commercial Extractants
Thanh Tuan Tran, Mudassir Iqbal, Man Seung Lee
Korean J. Met. Mater. 2019;57(12):787-794.   Published online 2019 Nov 22
DOI: https://doi.org/10.3365/KJMM.2019.57.12.787

Fe(III) can be easily extracted from weak acidic solutions by organophosphorus extractants, but stripping a large amount of Fe(III) from the loaded extractants is very difficult. The extraction and stripping of Fe(III) from 2 pH chloride and sulfate solutions was performed with ionic liquids(ILs) and organophosphorus acidic extractants, and the..... More

                           Cited By 1
795 Optimization of ZnO/Cu/ZnO Flexible Transparent Conductive Electrodes Fabricated by Magnetron Sputtering
마그네트론 스퍼터링법으로 제조된 ZnO/Cu/ZnO 유연 투명전극 성능 최적화 연구
Daekyun Kim, Taehyeong Lee, Dooho Choi
김대균, 이태형, 최두호
Korean J. Met. Mater. 2019;57(12):795-800.   Published online 2019 Nov 22
DOI: https://doi.org/10.3365/KJMM.2019.57.12.795

With the expanding development of flexible optoelectronic devices, the need for high-performance (i.e., high conductivity, high transmittance and flexibility) transparent conductive electrodes has grown. In this study, the critical role of thickness for each of the layers in ZnO/Cu/ZnO transparent conductive electrodes (TCE) for optoelectronic devices has been investigated. The..... More

801 Synthesis and Thermoelectric Properties of Partially Double-Filled Skutterudites (La1−zYbz)0.8Fe4−xCoxSb12
Ye-Eun Cha, Il-Ho Kim
Korean J. Met. Mater. 2019;57(12):801-807.   Published online 2019 Nov 22
DOI: https://doi.org/10.3365/KJMM.2019.57.12.801

Partially double-filled skutterudites were prepared via encapsulated melting and hot pressing processes. The skutterudite phase was successfully synthesized through partial double filling of La/Yb and substitution of Co. A small quantity of secondary phase (marcasite FeSb2) was formed, but its formation was suppressed by increasing Co charge compensation. The marcasite..... More

808 Effect of P/Al Molar Ratio and Curing Conditions of CBAPC Binder on Flexural Strength and Moisture Resistance of Artificial Sand Core
CBAPC 바인더로 제조한 인공사 중자의 강도 및 내습성에 미치는 P/Al 몰 비와 경화 조건의 영향
Hyeon Gon Oh, DongKook Park, Yangdo Kim, Man Sig Lee
오현곤, 박동국, 김양도, 이만식
Korean J. Met. Mater. 2019;57(12):808-816.   Published online 2019 Nov 22
DOI: https://doi.org/10.3365/KJMM.2019.57.12.808

CBAPC (chemically bonded aluminum phosphate ceramic) binders have various advantages, including superior corrosion resistance and strength at high temperature. They are also a non-toxic and eco-friendly material. We investigated an inorganic binder based on CBAPC using artificial sand for casting. The CBAPC binders were synthesized with various P/Al molar ratios..... More

                           Cited By 1
817 Demonstration Testing of Boiler Tubes in a Clean Power Test-Bed Plant
Yeon kwan Kang, Yinsheng He, Han-Sang Lee, Beom-Soo Kim, Liming Xu, Keesam Shin
Korean J. Met. Mater. 2019;57(12):817-827.   Published online 2019 Nov 22
DOI: https://doi.org/10.3365/KJMM.2019.57.12.817

The use of locally developed high performance alloys in power plants has become essential in the past ten years. Application of these alloys has been difficult because of a shortage of field demonstration testing, and the lack of lab-based test data. In this work, three types of locally developed heat..... More

                           Cited By 1
Email Alert
Author's Index
Impact factor
The Korean Institute of Metals and Materials
SCImago Journal & Country Rank
Similarity Check
Crossref Cited-by Linking
Editorial Office
The Korean Institute of Metals and Materials
6th Fl., Seocho-daero 56-gil 38, Seocho-gu, Seoul 06633, Korea
TEL: +82-2-557-1071   FAX: +82-2-557-1080   E-mail: metal@kim.or.kr
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Institute of Metals and Materials. All rights reserved.                 Developed in M2Community