Abstract
Because of their superior optical, and electrical properties, lead halide perovskites have emerged as potential materials for light-emitting-diodes. However, some obstacles have yet to be overcome for practical applications including low exciton binding energy, the difficulty of fabricating uniform perovskite films,, and their instability to heat, light, and moisture. In..... More

Abstract
The metallic binder in WC-Co hard metals was effectively strengthened using the solid solution phases of Co and W. These metallic phases of Co and W (Co_1-xW_x, x<1), which consist of two kinds of structures (FCC and HCP), were successfully formed by hydrogen reduction of milled oxides mixtures (Co₃O₄ and..... More

Abstract
This study was conducted to evaluate the corrosion resistance and optimize the heat-treatment process of AISI 439 ferrite stainless steel silicon and tin alloys with reduced chromium. The microstructure of the specimens and deposition under each condition were analyzed. The production of oxide films was compared based on the thickness..... More

Abstract
This study examined the effects of minor alloying elements (C, Ni, Cr, and Mo) on the long-term corrosion behaviors of ultrahigh-strength automotive steel sheets with a tensile strength of more than 1800 MPa. A range of experimental and analytical results showed that the addition of Ni, Cr, and Mo decreased..... More

Abstract
This study evaluated changes in delta-ferrite content depending on the preheating of AISI 316L stainless steel. We also determined the reasons for the variation in delta-ferrite content, which affects corrosion resistance. Changes in delta-ferrite content after preheating was confirmed using a Feritscope, and the microstructure was analyzed using optical microscopy..... More

Abstract
In this paper, we suggest a novel recycling process for hard metal sludge that does not use ammonium paratungstate. Ammonia, which in the conventional recycling process is essential for removing sodium and crystallized tungstate, was not used in the novel process. Instead of ammonia, acid was used to remove the..... More

Abstract
In the Fourth industrial age, there is increasing use of electronic devices with high frequency (GHz) operating circuits for radio wave transmission/reception. This can lead to electromagnetic noise, and malfunctions in nearby devices. Electromagnetic shielding technology has emerged as an important way of preventing device malfunctions due to noise, and..... More

Abstract
A copper (Cu) metal-ceramic filler composite with high thermal conductivity and a suitable thermal expansion coefficient was designed for application as a high-performance heat dissipation material. The purpose of the designed material was to utilize the high thermal conductivity of Cu while lowering its high coefficient of thermal expansion by..... More

Abstract
Smartphones were launched in the market as a product in the early 2000’s. Today, less than 20 years later, the smartphone has become one of the most frequently used devices for human contact. The market is saturated, and competition between products has intensified, and it is not difficult to find..... More

Abstract
The effects of dissolution of the η′ phase by solution treatment on the mechanical properties of A7075-T6 alloy were investigated. Immediately after solution treatment of the T6 sheet at 450 ^oC or higher, elongation significantly increased and dissolution of the η′ phase occurred. η′ is the main hardening phase. After..... More