| Home | E-Submission/Review | Sitemap | Editorial Office |  
top_img
Korean Journal of Metals and Materials > Volume 54(12); 2016 > Article
Korean Journal of Metals and Materials 2016;54(12): 885-892. doi: https://doi.org/10.3365/KJMM.2016.54.12.885
사워(Sour) 환경에서 고강도강의 내식성에 미치는 합금원소의 영향
현영민, 김희산
홍익대학교 재료공학부
Effects of Alloying Elements on the Corrosion Properties of High Strength Steel in a Sour Environment
Youngmin Hyun, Heesan Kim
School of Mater. Sci. and Eng. Hongik University, Sejong 30016, Republic of Korea
Correspondence  Heesan Kim ,Tel: +82-41-860-2685, Email: heesan1118@gmail.com
Received: 23 May 2016;  Accepted: 11 June 2016.  Published online: 5 December 2016.
ABSTRACT
The effects of alloying elements (Mn, Cr, and C) on the corrosion resistance of steel were examined using weight loss test, polarization test in a sour environment, analysis of rust, and the prediction of stable corrosion product. Carbon was found to improve corrosion resistance after 7-day immersion, while manganese and chromium negatively affected the corrosion resistance of steels during the entire immersion time. The negative effect of manganese and chromium on the corrosion resistance in the sour environment was explained, in that both manganese and chromium were stable as ionic species were dissolved in the sour solution, which was proved by the prediction of stable phases based on phase equilibria. The positive effect of carbon, on the other hand, was due to the formation of amorphous carbon distributed near the metal/rust interface, which may improve the adhesion of the corrosion product to the matrix. This is consistent with not only the formation of adhesive rust on the high carbon-containing steels but also the change in the corrosion behaviour of the high carbon-containing steels, from linear to parabolic behaviour, with time.
Keywords: alloys, hot rolling, corrosion, TEM, E-pH diagram
Editorial Office
The Korean Institute of Metals and Materials
6th Fl., Seocho-daero 56-gil 38, Seocho-gu, Seoul 06633, Korea
TEL: +82-2-557-1071   FAX: +82-2-557-1080   E-mail: metal@kim.or.kr
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Institute of Metals and Materials.                 Developed in M2PI