| 진공상온분사 공정을 이용한 세라믹 도료 분말의 장식용 코팅 및 패터닝 제조 |
| 박형권, 김진영, 권한솔, 이승태, 이창희 |
| 한양대학교 신소재공학부 |
| Fabrication of Decorative Coating/Patterning of Ceramic Pigment Powder Using Vacuum Kinetic Spraying Process |
| Hyungkwon Park, Jinyoung Kim, Hansol Kwon, Seongtae Lee, Changhee Lee |
| Kinetic Spray Coating Laboratory (NRL), Division of Materials Science and Engineering, Hanyang University, Seoul 04763, Republic of Korea |
|
|
|
Received: 6 January 2016; Accepted: 17 March 2016. Published online: 5 August 2016. |
|
|
|
| ABSTRACT |
|
Vacuum kinetic spraying (VKS) is a relatively advanced process, by which a dense film can be fabricated at room temperature. Various materials including ceramic, metal, polymer and composite can be used as the substrate and coating materials. In this research, red and blue color films were successfully fabricated on glass substrates using Co(Al, Cr)2O4 and C9H13CdN2O4SSe ceramic pigment powders in a VKS system. Although the deposition behavior of each powder differed according to particle size and/or materials, it was confirmed that the brightness and transmittance of the color film could be easily changed by controlling the process parameters. Furthermore, using masking technology, design color patterns were fabricated. As a result, it is cautiously expected that the VKS process can be utilized to produce decorative coating/patterning for product design. |
| Keywords:
vacuum kinetic spray (aerosol deposition), decorative coating, optical property, ceramics, patterning system. |
|
|
|
PDF Links
Full text via DOI
Download Citation 
Print 
